MX-FXX1 (serv.man2). Service Manual Complete Manual - Sharp Copying Equipment Service Manual (repair manual). Page 11

MX-FXX1  SIMULATIONS, FAX SOFTWARE SWITCH  5 – 2

 

 

13--

: Clear/cancel (Trouble etc.)

Function (Purpose) : Used to cancel the self-diag "U1" trouble.
Section

: FAX

: Trouble

1)

Press [EXECUTE] button.

2)

Press [YES] button to execute cancellation of the trouble. 

 

 

22-11

: Adjustment/Setup/Operation data check

Function (Purpose) : Used to check the use frequency (send/

receive) of FAX. (Only when FAX is
installed)

: FAX

: Counter

The values of the FAX send counter and the FAX receive counter
are displayed.
Press [COLOR] or [BLACK] button to print. 

66

11

Used to send the selected signal at 300bps to the line and the speaker. (Send level: 
Max.)

Operation test/Check

FAX

12

Used to send the selected signal at 300bps to the line and the speaker. (Send level: 
Soft SW setting)
* For the kings of send signals at 300bps, refer to SIM66-11, 300bps send signal table.

Operation test/Check

FAX

13

Used to register dial numbers for SIM66-14/15/16, Dial test. (Up to 20 digits can be 
registered.)

Setting

FAX

14

Used to execute the dial pulse (10PPS) send test and to adjust the make time.

Adjustment

FAX

15

Used to execute the dial pulse (20PPS) send test and to adjust the make time.

Adjustment

FAX

16

Used to execute the DTFM signal send test and to adjust the send level.

Adjustment

FAX

17

Used to send the DTMF signal to the line and the speaker. (Send level: Max.)

Operation test/Check

FAX

18

Used to send the DTMF signal to the line and the speaker. (Send level: Soft SW 
setting)

Operation test/Check

FAX

19

Used to write the telephone book data stored in HD into the FLASH ROM.

Backup

FAX

20

Used to write the telephone book data stored in the FLASH ROM into HD.

Backup

FAX

21

Used to print the selected items (various registration information, communication 
management information, file management information, system error, protocol 
monitor).

Check

FAX

22

Used to set the handset sound volume. (This simulation can be executed even though 
the handset setting is set to NO. When, however, the handset is not installed, the 
sound volume cannot be checked.) (Japan model only)

Setting

FAX

24

Used to clear the FAST save data.

Data clear

FAX

25

Used to register the FAX number for MODEM dial-in.

Setting

FAX

26

Used to register external telephone numbers for MODEM dial-in.

Setting

FAX

29

Used to initialize the telephone book data (the one-touch registration table, the FTP/
Desktop expansion table, the group expansion table, the program registration table, 
the interface memory box table, the meta data, InboundRouting, and the 
DocumentAdmin table).

Clear

FAX

30

Used to display the TEL/LIU status change, The display is highlighted by status 
change.

Operation test/Check

FAX

31

Used to set ON/OFF the port for output to TEL/LIU.

Setting

FAX

32

Used to check the fixed data received from the line and to display the result.

Operation test/Check

FAX

33

Used to execute detection of various signals with the line connected and to display the 
detection result. When a signal is detected, the display is highlighted.

Operation test/Check

FAX

34

Used to execute the send test and display the time required for sending image data in 
the test. Used to execute send test and display. (Unit: ms)

Operation test/Check

FAX

36

Used to check send and receive data from the MODEM controller to the MFP controller 
or the data line or the command line individually.

Operation test/Check

FAX

39

Used to check and change the destination setting saved in EEPROM of the FAX BOX.

Setting

FAX

42

Used to rewrite the program to power control installed in the FAX BOX.

Setting

–

43

Used to write the adjustment value into the power control installed in the FAX BOX.

Setting

FAX

0

SIMULATION NO.13

TEST

U1 TROUBLE CANCELLATION

CLOSE

EXECUTE

ARE YOU SURE?

YES

NO

FAX OUTPUT

FAX print quantity counter (for line 1)

FAX OUTPUT_L2

FAX print quantity counter (for line 2)

FAX SEND

FAX send counter

FAX RECEIVED

FAX receive counter

SEND IMAGES

FAX send quantity counter (for line 1)

SEND IMAGES_L2

FAX send quantity counter (for line 2)

SEND TIME

FAX send time

RECEIVED TIME

FAX receive time

ACR SEND

Number of carrier prefix adding communications