Read Sharp MX-FX11 (serv.man4) Service Manual online
MX-7040N MX-FX11 (FACSIMILE EXPANSION KIT) 25 – 2
B. Pull out the MFP control unit
1)
Remove the screw, and remove the right rear cabinet.
2)
Remove the screw, and pull out the MFP control unit.
C. Connect the interface cable
1)
Connect the interface cable to the MFP control PWB.
NOTE: Check that the connector is not obliquely inserted.
2)
Push the interface cable into the recessed portion of the sheet
metal on the MFP control unit.
metal on the MFP control unit.
3)
Fix a snap band with the M3 screw (Packed items).
D. Attach the MFP control unit
1)
Attach the MFP control unit into the main unit, and fix the
screw.
screw.
2)
Cut out the cut-out portion of the right rear cabinet.
3)
Fit the interface cable into the opening that has been cut.
Attach the right rear cabinet, and fix the screw.
Attach the right rear cabinet, and fix the screw.
1
2
1
1
2
1
2
3
2
2
1
2
1
Click on the first or last page to see other MX-FX11 (serv.man4) service manuals if exist.