Read Sharp MX-FX10 (serv.man3) User Guide / Operation Manual online
9
BEFORE USING THE FAX FUNCTION
1
(13) [MODE SELECT] keys (step 1 on page 18)
These are used these keys to change modes.
(14) [SPECIAL FUNCTION] key
This key is used to select a special transmission
or reception function, configure function settings,
and to store auto-dial numbers.
or reception function, configure function settings,
and to store auto-dial numbers.
(15) [PROGRAM] key (page 45)
Press this key to use a program.
(16) [RESOLUTION] key (page 15)
This key is used to select resolution and exposure
settings.
settings.
(17) [ADDRESS] key (page 21)
This key is used to search for a fax destination
that has been stored as an auto-dial number in
the address book.
that has been stored as an auto-dial number in
the address book.
(18) [BROADCAST] key (page 32)
This is used to perform a broadcast transmission.
(19) [ORIGINAL SIZE] key (page 14)
This is used to set the size of the original to be
faxed.
faxed.
(20) [DUPLEX SCAN] key (page 22)
Press this key to use the duplex scan function.
(Only on models with a RSPF installed.)
(Only on models with a RSPF installed.)
(21) Arrow keys (
)
These are used to select items and move through
pages.
pages.
(22) [CA] key
This is used to cancel a transmission or
programming operation. When pressed during an
operation, the operation is cancelled and the display
returns to the base screen described on page 10.
This key is also used to cancel a resolution, paper
size, or special function setting that was selected
when sending a fax.
programming operation. When pressed during an
operation, the operation is cancelled and the display
returns to the base screen described on page 10.
This key is also used to cancel a resolution, paper
size, or special function setting that was selected
when sending a fax.
(23) [START] key (
)
This is used at the following times:
(1) When starting transmission
(2) When scanning an original
(3) When starting manual reception
(4) When configuring and storing settings
(1) When starting transmission
(2) When scanning an original
(3) When starting manual reception
(4) When configuring and storing settings
ABC
DEF
JKL
GHI
MNO
TUV
PQRS
WXYZ
@.-_
READ-END
ACC. #-C
BACK
OK
INTERRUPT
COPY RATIO
ADDRESS
ADDRESS
ADDRESS
DUPLEX SCAN
DUPLEX SCAN
DUPLEX SCAN
2-SIDED COPY
PAPER SELECT
RESOLUTION
RESOLUTION
RESOLUTION
RESOLUTION
AUTO IMAGE
FORMAT
BROADCAST
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
ORIGINAL SIZE
(5)
(6)
(7)
(8)
(16)
(17)
(18)
(19)
(20)
(21)
(23)
(22)
(9)
• When the auto power shut-off function is
activated, all indicators except the
[START] key indicator go off. For the
information on the auto power shut-off
function, see the "Operation manual (for
general information and copier)."
[START] key indicator go off. For the
information on the auto power shut-off
function, see the "Operation manual (for
general information and copier)."
• For information on the keys and lights
which are used for the copy function and
other functions, see "Operation Panel" in
the manual for each function.
other functions, see "Operation Panel" in
the manual for each function.
Note
Pegasus-E_Fax_Ex.book 9 ページ ２００９年６月５日 金曜日 午後１時４９分
Click on the first or last page to see other MX-FX10 (serv.man3) service manuals if exist.