MX-FNX9 (serv.man25). ROM UPGRADE ... (2) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-FNX9 (serv.man25) Technical Bulletin online

 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-672 
[Description] 
No. Items 
Detail 
1 
Modification of problem 
2 
Modification of problem 
Sometimes staple position is dislocated on rear side when 2-staple mode is set. 
Modification is made to fix this problem. 
3 
Modification of problem 
When stapling small size of papers, sometimes papers in processing tray move toward 
paper exit gradually which led to bad alignment. Modification is made to fix this problem. 
4 
Modification of problem 
Bad alignment occurred in staple mode around 35th papers depends on type of paper. 
Modification is made to fix this problem. 
 
Page of 2
Display

Download Sharp MX-FNX9 (serv.man25) Technical Bulletin

Found More:

MX-FNX9 (serv.man25) Service Manuals

Preview DownloadPagesSize
MX-FNX9 MX-FNX9 Service Manual (Complete) Service Manual 58 11.83 MB
MX-FNX9 (serv.man2) Revised November 2011 Parts Guide 22 6.64 MB
MX-FNX9 (serv.man3) Revised July 2011 Parts Guide 22 6.83 MB
MX-FNX9 (serv.man4) Revised July 10 Parts Guide 21 6.89 MB
MX-FNX9 (serv.man27) ROM UPGRADE 1 Technical Bulletin 1 18.67 KB
MX-FNX9 (serv.man26) CORRECTION OF PART CODE FOR FINISHER CONTROL PWB. Technical Bulletin 1 72.56 KB
MX-FNX9 (serv.man24) CCE-971 Improvement Of paper Feed Output stability Technical Bulletin 2 21.56 KB
MX-FNX9 (serv.man23) IMPROVED STRAIGHT-AHEAD PAPER MOVEMENT DUE TO BELT COLLAR UNIT ON TRANSPORT SECTION BEING CHANGED IN SHAPE Technical Bulletin 2 96.04 KB
MX-FNX9 (serv.man22) ENHANCEMENT TO PREVENT MISFEED DUE TO BUNCH ROLLER PRESSURE LEVER BECOMING DETACHED Technical Bulletin 2 128.86 KB
MX-FNX9 (serv.man21) COUNTERMEASURE FOR JAM (POD1_S ETC) CAUSED BY PAPER BEING TOUCHED TO ENTER GATE WHEN PERFORMING 2-SIDED PRINT WITH A3 PAPER Technical Bulletin 1 114.33 KB
MX-FNX9 (serv.man20) PAPER EXIT ALIGNMENT IMPROVEMENT Technical Bulletin 2 120.44 KB
MX-FNX9 (serv.man19) MX-FNX9 FN10 FN11 FN18 PNX6 ROM CHANGE FOR VIRGO 2 MODELS - MX-4140 4141 5140 5141N - BULLETIN ONLY Technical Bulletin 1 19.73 KB
MX-FNX9 (serv.man18) Countermeasure To Prevent POD1_S Misfeeds Technical Bulletin 3 763.89 KB
MX-FNX9 (serv.man17) COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE SECTION OF INNER FINISHER Technical Bulletin 3 289.5 KB
MX-FNX9 (serv.man16) Modification of control board PWB and firmware version upgrade for productivity improvement. Technical Bulletin 2 57.98 KB
MX-FNX9 (serv.man15) Countermeasure For Paper Jam POD1_S POD2_S Around Entrance Of Finisher. Technical Bulletin 5 661.7 KB
MX-FNX9 (serv.man14) CCE-1308 COUNTERMEASURE FOR JAM DUE TO DETERIORATION OF CUSHION Technical Bulletin 5 630.32 KB
MX-FNX9 (serv.man13) Firmware Update (6). Technical Bulletin 1 13.23 KB
MX-FNX9 (serv.man12) For MXM283 363N and MX453 503N Production Run Date May 2009 Driver / Update 190.49 KB
MX-FNX9 (serv.man11) For MX4100N and MX5000N Production Run Date May 2009 Driver / Update 196.1 KB
MX-FNX9 (serv.man10) For MX2600N and MX3100N Production Run Date May 2009 Driver / Update 191.38 KB
MX-FNX9 (serv.man9) For MX4140N-5141N Models -Production Run September 2013 Driver / Update 146.23 KB
MX-FNX9 (serv.man8) Firmware Revision IMPORTANT This firmware can only be used on modified Control PWB's as per Technical Bulletin CCE1295. Driver / Update 820.65 KB
MX-FNX9 (serv.man7) Firmware update (6). File contains model specific folders and Technical Bulletin. Driver / Update 985.76 KB
MX-FNX9 (serv.man6) Firmware update 02.01.02.B0 10 Driver / Update 141.22 KB
MX-FNX9 (serv.man5) Firmware update 02.01.02.D0 20 Driver / Update 141.23 KB

Random: