MX-FNX9 (serv.man24). CCE-971 Improvement Of paper Feed Output stability - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-FNX9 (serv.man24) Technical Bulletin online

 
 
 
2/2 
3. Action: 
From June 2011 production 
 
4. Parts Action: 
Current parts 
New parts 
Ref. 
No. 
Model 
name 
Version P/G No. 
Parts code 
Parts code 
Price
rank
Q'ty
Parts name 
Effective
time 
Inter-
change-
ability
2-10 
2-7 
0CW4141K05102
0CW4141K05103
ASY-ROLLER-FE-KO
-BLT 
1 
MX-FNX1 
MX-FNX9 
MX-FN17 
ALL
2-11 
2-47 
0CW4141K05202
0CW4141K05203
AK
2 
ASY-ROLLOR-FE-KO
-BLT-W 
2011/6 3 
<Interchange> 
1. Interchangeable. 
4. Not interchangeable. 
2. Current type can be used in place of new type. 
New type cannot be used in place of current type. 
5. Interchangeable if replaced with same types of   
related parts in use. 
3. Current type cannot be used in place of new type. 
New type can be used in place of current type. 
6. Others. 
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with 
specified ones for maintaining the safety and performance of the set. 
 
Page of 2
Display

Download Sharp MX-FNX9 (serv.man24) Technical Bulletin

Found More:

MX-FNX9 (serv.man24) Service Manuals

Preview DownloadPagesSize
MX-FNX9 MX-FNX9 Service Manual (Complete) Service Manual 58 11.83 MB
MX-FNX9 (serv.man2) Revised November 2011 Parts Guide 22 6.64 MB
MX-FNX9 (serv.man3) Revised July 2011 Parts Guide 22 6.83 MB
MX-FNX9 (serv.man4) Revised July 10 Parts Guide 21 6.89 MB
MX-FNX9 (serv.man27) ROM UPGRADE 1 Technical Bulletin 1 18.67 KB
MX-FNX9 (serv.man26) CORRECTION OF PART CODE FOR FINISHER CONTROL PWB. Technical Bulletin 1 72.56 KB
MX-FNX9 (serv.man25) ROM UPGRADE ... (2) Technical Bulletin 2 31.61 KB
MX-FNX9 (serv.man23) IMPROVED STRAIGHT-AHEAD PAPER MOVEMENT DUE TO BELT COLLAR UNIT ON TRANSPORT SECTION BEING CHANGED IN SHAPE Technical Bulletin 2 96.04 KB
MX-FNX9 (serv.man22) ENHANCEMENT TO PREVENT MISFEED DUE TO BUNCH ROLLER PRESSURE LEVER BECOMING DETACHED Technical Bulletin 2 128.86 KB
MX-FNX9 (serv.man21) COUNTERMEASURE FOR JAM (POD1_S ETC) CAUSED BY PAPER BEING TOUCHED TO ENTER GATE WHEN PERFORMING 2-SIDED PRINT WITH A3 PAPER Technical Bulletin 1 114.33 KB
MX-FNX9 (serv.man20) PAPER EXIT ALIGNMENT IMPROVEMENT Technical Bulletin 2 120.44 KB
MX-FNX9 (serv.man19) MX-FNX9 FN10 FN11 FN18 PNX6 ROM CHANGE FOR VIRGO 2 MODELS - MX-4140 4141 5140 5141N - BULLETIN ONLY Technical Bulletin 1 19.73 KB
MX-FNX9 (serv.man18) Countermeasure To Prevent POD1_S Misfeeds Technical Bulletin 3 763.89 KB
MX-FNX9 (serv.man17) COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE SECTION OF INNER FINISHER Technical Bulletin 3 289.5 KB
MX-FNX9 (serv.man16) Modification of control board PWB and firmware version upgrade for productivity improvement. Technical Bulletin 2 57.98 KB
MX-FNX9 (serv.man15) Countermeasure For Paper Jam POD1_S POD2_S Around Entrance Of Finisher. Technical Bulletin 5 661.7 KB
MX-FNX9 (serv.man14) CCE-1308 COUNTERMEASURE FOR JAM DUE TO DETERIORATION OF CUSHION Technical Bulletin 5 630.32 KB
MX-FNX9 (serv.man13) Firmware Update (6). Technical Bulletin 1 13.23 KB
MX-FNX9 (serv.man12) For MXM283 363N and MX453 503N Production Run Date May 2009 Driver / Update 190.49 KB
MX-FNX9 (serv.man11) For MX4100N and MX5000N Production Run Date May 2009 Driver / Update 196.1 KB
MX-FNX9 (serv.man10) For MX2600N and MX3100N Production Run Date May 2009 Driver / Update 191.38 KB
MX-FNX9 (serv.man9) For MX4140N-5141N Models -Production Run September 2013 Driver / Update 146.23 KB
MX-FNX9 (serv.man8) Firmware Revision IMPORTANT This firmware can only be used on modified Control PWB's as per Technical Bulletin CCE1295. Driver / Update 820.65 KB
MX-FNX9 (serv.man7) Firmware update (6). File contains model specific folders and Technical Bulletin. Driver / Update 985.76 KB
MX-FNX9 (serv.man6) Firmware update 02.01.02.B0 10 Driver / Update 141.22 KB
MX-FNX9 (serv.man5) Firmware update 02.01.02.D0 20 Driver / Update 141.23 KB

Random: