MX-FNX9 (serv.man18). Countermeasure To Prevent POD1_S Misfeeds - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp MX-FNX9 (serv.man18) Technical Bulletin online

Pg. 3 of 3 
 
 
[Field Action] 
On the combination of Virgo2 + MX‐FNX9, please take action on the machines 
already installed or any new machines which will be installed, with the following 
procedure: 
 
Please remove the Delivery Roller Sponge on the delivery section of the Virgo2 
Main Unit. 
 
 
 
 
We are sorry for any inconvenience, but your co‐operation is highly appreciated. 
 
 
 
 
 
Page of 3
Display

Download Sharp MX-FNX9 (serv.man18) Technical Bulletin

Found More:

MX-FNX9 (serv.man18) Service Manuals

Preview DownloadPagesSize
MX-FNX9 MX-FNX9 Service Manual (Complete) Service Manual 58 11.83 MB
MX-FNX9 (serv.man2) Revised November 2011 Parts Guide 22 6.64 MB
MX-FNX9 (serv.man3) Revised July 2011 Parts Guide 22 6.83 MB
MX-FNX9 (serv.man4) Revised July 10 Parts Guide 21 6.89 MB
MX-FNX9 (serv.man27) ROM UPGRADE 1 Technical Bulletin 1 18.67 KB
MX-FNX9 (serv.man26) CORRECTION OF PART CODE FOR FINISHER CONTROL PWB. Technical Bulletin 1 72.56 KB
MX-FNX9 (serv.man25) ROM UPGRADE ... (2) Technical Bulletin 2 31.61 KB
MX-FNX9 (serv.man24) CCE-971 Improvement Of paper Feed Output stability Technical Bulletin 2 21.56 KB
MX-FNX9 (serv.man23) IMPROVED STRAIGHT-AHEAD PAPER MOVEMENT DUE TO BELT COLLAR UNIT ON TRANSPORT SECTION BEING CHANGED IN SHAPE Technical Bulletin 2 96.04 KB
MX-FNX9 (serv.man22) ENHANCEMENT TO PREVENT MISFEED DUE TO BUNCH ROLLER PRESSURE LEVER BECOMING DETACHED Technical Bulletin 2 128.86 KB
MX-FNX9 (serv.man21) COUNTERMEASURE FOR JAM (POD1_S ETC) CAUSED BY PAPER BEING TOUCHED TO ENTER GATE WHEN PERFORMING 2-SIDED PRINT WITH A3 PAPER Technical Bulletin 1 114.33 KB
MX-FNX9 (serv.man20) PAPER EXIT ALIGNMENT IMPROVEMENT Technical Bulletin 2 120.44 KB
MX-FNX9 (serv.man19) MX-FNX9 FN10 FN11 FN18 PNX6 ROM CHANGE FOR VIRGO 2 MODELS - MX-4140 4141 5140 5141N - BULLETIN ONLY Technical Bulletin 1 19.73 KB
MX-FNX9 (serv.man17) COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE SECTION OF INNER FINISHER Technical Bulletin 3 289.5 KB
MX-FNX9 (serv.man16) Modification of control board PWB and firmware version upgrade for productivity improvement. Technical Bulletin 2 57.98 KB
MX-FNX9 (serv.man15) Countermeasure For Paper Jam POD1_S POD2_S Around Entrance Of Finisher. Technical Bulletin 5 661.7 KB
MX-FNX9 (serv.man14) CCE-1308 COUNTERMEASURE FOR JAM DUE TO DETERIORATION OF CUSHION Technical Bulletin 5 630.32 KB
MX-FNX9 (serv.man13) Firmware Update (6). Technical Bulletin 1 13.23 KB
MX-FNX9 (serv.man12) For MXM283 363N and MX453 503N Production Run Date May 2009 Driver / Update 190.49 KB
MX-FNX9 (serv.man11) For MX4100N and MX5000N Production Run Date May 2009 Driver / Update 196.1 KB
MX-FNX9 (serv.man10) For MX2600N and MX3100N Production Run Date May 2009 Driver / Update 191.38 KB
MX-FNX9 (serv.man9) For MX4140N-5141N Models -Production Run September 2013 Driver / Update 146.23 KB
MX-FNX9 (serv.man8) Firmware Revision IMPORTANT This firmware can only be used on modified Control PWB's as per Technical Bulletin CCE1295. Driver / Update 820.65 KB
MX-FNX9 (serv.man7) Firmware update (6). File contains model specific folders and Technical Bulletin. Driver / Update 985.76 KB
MX-FNX9 (serv.man6) Firmware update 02.01.02.B0 10 Driver / Update 141.22 KB
MX-FNX9 (serv.man5) Firmware update 02.01.02.D0 20 Driver / Update 141.23 KB

Random: