Read Sharp MX-FNX3 / MX-FNX4 Service Manual online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 69
b. Removing waste full sensor PCB
1) Remove the screw [1], disconnect the connector [2], and
1) Remove the screw [1], disconnect the connector [2], and
remove the waste full sensor PCB unit [3].
(5) Punch controller PCB
a. Removing rear cover
1) Remove the three screws [1] to remove the rear cover [2].
1) Remove the three screws [1] to remove the rear cover [2].
b. Removing punch controller PCB
1) Remove the two screws [1] and disconnect the seven connec-
1) Remove the two screws [1] and disconnect the seven connec-
tors [7]. Then, remove the punch controller PCB [3].
[1]
[2]
[3]
[1]
[2]
[2]
[2]
[2]
[1]
[3]
Click on the first or last page to see other MX-FNX3 / MX-FNX4 service manuals if exist.