Read Sharp MX-FNX1 (serv.man8) Service Manual online
MX-FNX1/MX-PNX1 DISASSEMBLY AND ASSEMBLY 6 – 10
5)
Remove the gear, and remove the tray motor.
(5) Tray paper empty sensor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the left cover and the bottom cover. Refer to A-(4).
3)
Remove the tray bottom cover.
4)
Pull out the tray. Remove the screw, and remove the tray.
5)
Remove the tray paper empty sensor.
F. Others
(1) Control PWB
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the rear cover. Refer to A-(3).
3)
Disconnect the connector, and remove the screw. Remove the
PWB support and remove the control PWB.
PWB support and remove the control PWB.
(2) Fan
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Shift the staple unit to the rear side. Disconnect the connector
and remove the fan.
* When installing, take care that the label of the fan comes to
and remove the fan.
* When installing, take care that the label of the fan comes to
the direction illustrated.
(3) Front cover switch
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the spring, and remove the interlock sensor lever.
Remove the front cover switch, and disconnect the connector.
Remove the front cover switch, and disconnect the connector.
1
2
1
2
3
2
3
2
3
1
2
3
4
Blue
Red
Yellow
Click on the first or last page to see other MX-FNX1 (serv.man8) service manuals if exist.