Read Sharp MX-FN27 Service Manual online
MX-FN27 N, MX-PN14 DISASSEMBLY AND ASSEMBLY 5 – 4
NOTE: How to assemble the Front Tray Lack and Rear Tray Lack
1)Insert the Front Tray Lack [1] and Rear Tray Lack [2] at the
Guide.
Guide.
2)Release the latch and move the Tray Lack to the bottom.
3)Check the phase position between the Front Tray Lack [1] and
Rear Tray Lack [2] with the lines marked [3] on them. When the
phase position is differ, follow the step 1) again.
Rear Tray Lack [2] with the lines marked [3] on them. When the
phase position is differ, follow the step 1) again.
2)
Remove the Cable Guide [1].
– 1 Screw [2]
– 3 Connectors [3]
– 2 Cables [4]
3)
Remove the Tray Shift Motor Unit [1].
– 3 Screws [2]
4)
Remove the E-ring [1] and the Gear [2] and the Pin [3].
5)
Remove the E-ring [1], and move the Gear [2], after that remove
the pin [3] and the Bushing [4] and the Tray Drive Shaft [5].
the pin [3] and the Bushing [4] and the Tray Drive Shaft [5].
6)
Remove the E-ring [1] and the Pully [2] and the Pin [3] and the
Bushing [4].
Bushing [4].
7)
Move the Bushing [1], and remove the Paper Fold Unit [2].
8)
Remove the 2 Connectors [1] and the 2 Cables [2].
[2]
[1]
[B]
[A]
1x
2x
3x
[1]
[2]
[3]
[4]
3x
[2]
[1]
[3]
[1]
[2]
[1]
[2]
[3]
[4]
[5]
[1]
[2]
[3]
[4]
[1]
[2]
2x
2x
[1]
[2]
[1]
[2]
Click on the first or last page to see other MX-FN27 service manuals if exist.