MX-FN26. Service Manual for FN26N. - Sharp Copying Equipment Service Manual (repair manual). Page 24

MX-FN26 N  DISASSEMBLY AND ASSEMBLY  8 – 8

NOTE: After fixing the paddle solenoid, the paddler solenoid arm

must be in contact with the paddler drive collar with the
plunger in the free state.
Press the plunger with your finger to check to confirm that
the clearance between the paddler solenoid arm and the
paddler drive collar is 0 - 1.5mm.

1)

Remove the delivery tray position sensor and the delivery tray
lower limit sensor.

1)

Remove the compiler.

2)

Remove the spring, the E-ring, the gear, and remove the
screw.

3)

Disconnect the connector, remove the paper delivery motor
unit.

4)

Remove the screw, and remove the paper delivery motor.

1)

Remove the screw.

2)

Disconnect the connector, and remove the delivery roller lift
motor.

0 - 1.5mm

0mm