Read Sharp MX-FN26 Service Manual online
MX-FN26 N DISASSEMBLY AND ASSEMBLY 8 – 7
4)
Remove the staple tray paper detector, and disconnect the
connector.
connector.
3. Paper delivery
A. Delivery roller position sensor
1)
Remove the rear cabinet.
2)
Remove the E-ring, and remove the pressure release drive
gear. Disconnect the connector, and remove the paper delivery
roller position sensor.
gear. Disconnect the connector, and remove the paper delivery
roller position sensor.
B. Tray lift motor
1)
Remove the front cabinet.
2)
Remove the harness holder.
3)
Disconnect the connector, remove the screw, and remove the
lift drive frame.
lift drive frame.
4)
Remove the worm gear and the screw, and remove the tray lift
motor.
motor.
C. Paddle solenoid
1)
Remove the E-ring, the paddler drive collar, the baring, the
gear, the parallel pin, the Mylar, the belt, and the pulley.
gear, the parallel pin, the Mylar, the belt, and the pulley.
2)
Remove the screw, and remove the EV frame unit.
3)
Remove the screw, and remove the paddle solenoid.
Click on the first or last page to see other MX-FN26 service manuals if exist.