Read Sharp MX-FN21 / MX-FN22 / MX-PN13 (serv.man4) Service Manual online
MX-7040N MX-CF11 (INSERTER) 17 – 6
K. Height and tilt adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
height is decreased. When turned clockwise, the height is
increased.
MEMO: The specification of the height and the tilt adjustment are
as follows.
as follows.
Height: The difference of level between top surface of the adjacent
device is within
device is within
2mm.
Tilt: The difference of clearance between upper and lower part of
the adjacent device is within
the adjacent device is within
2mm.
1)
Place an adjustment dish under every adjuster bolt, and screw
the bolt. (4 positions)
the bolt. (4 positions)
2)
Turn the adjuster bolts (1) and (2) in the above figure, and
adjust the height.
adjust the height.
3)
Turn the adjuster bolts (3) and (4) in the above figure, and
adjust the tilt.
adjust the tilt.
Click on the first or last page to see other MX-FN21 / MX-FN22 / MX-PN13 (serv.man4) service manuals if exist.