Read Sharp MX-FN21 / MX-FN22 / MX-PN13 (serv.man4) Service Manual online
MX-7040N MX-CF11 (INSERTER) 17 – 3
D. Paper guide C (bundled with the decurler unit)
installation
1)
Install the paper guide C (bundled with the decurler unit No.13)
to the paper feed side of the inserter with the screws (bundled
with the decurler unit No.1).
to the paper feed side of the inserter with the screws (bundled
with the decurler unit No.1).
E. Gasket installation ( Only for Taiwan)
1)
Stick a gasket (Packed items No.22) to the paper feed side of
the inserter as the following reference.
the inserter as the following reference.
F. Installation of the connection plate and the
protection Mylar to the decurler unit
1)
Remove the decurler unit plates.
2)
Attach the protection sheet (bundled with the decurler unit
No.14) to the decurler unit with the screw (bundled with the
decurler unit No.1).
No.14) to the decurler unit with the screw (bundled with the
decurler unit No.1).
MEMO: Temporarily attach the protection sheet to the decurler
unit with the duplex tape (back of the protection sheet), then fix
it with the screw.
unit with the duplex tape (back of the protection sheet), then fix
it with the screw.
3)
Attach the connection plate F/R (Packed items No.8, 9) to the
decurler unit with the screws (Packed items No.18 Screw
4x6L).
decurler unit with the screws (Packed items No.18 Screw
4x6L).
G. Connection with the decurler unit
1)
Open the inserter front upper cover, remove the screw, and
pull the lock lever toward you.
pull the lock lever toward you.
2)
Connect the inserter to the decurler unit.
Insert the pin in the decurler unit side into the unit hole.
Insert the pin in the decurler unit side into the unit hole.
Photo viewed from the R side
20mm from the cover line
Frame line
1
3
Click on the first or last page to see other MX-FN21 / MX-FN22 / MX-PN13 (serv.man4) service manuals if exist.