Read Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) Service Manual online
MX-7040N MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding)) 14 – 4
2. Installation
NOTE: When the saddle finisher is installed, first install the paper
pass unit, and then install the saddle finisher.
NOTE: When the saddle finisher and punch unit is installed at the
same time, first install the punch unit, and then install the
saddle finisher.
saddle finisher.
A. Installation of the rail
1)
Install the rail (Packed items (No.5)) to the saddle stitch fin-
isher with the fixing screws (Packed items (No.1)).
isher with the fixing screws (Packed items (No.1)).
2)
Install the rail reception sheet metal (Packed items (No.6)) to
the main unit with the fixing screws (Packed items (No.2)).
the main unit with the fixing screws (Packed items (No.2)).
B. Installation of the connection fixture F/R
1)
Install the connection fixture R (Packed items (No.8)) to the
main unit with the fixing screws (Packed items (No.3)).
main unit with the fixing screws (Packed items (No.3)).
2)
Install the connection fixture F (Packed items (No.7)) to the
main unit with the fixing screws (Packed items (No.3)).
main unit with the fixing screws (Packed items (No.3)).
C. Attaching the cushion
1)
Attach the cushion (S) (Packed items), the cushion (M)
(Packed items) and the cushion (L) (Packed items) to the posi-
tion indicated in the figure.
(Packed items) and the cushion (L) (Packed items) to the posi-
tion indicated in the figure.
Cushion A
attachment
position
attachment
position
Cushion B
attachment
position
attachment
position
Cushion C
attachment
position
attachment
position
Cushion A attachment
reference (Front edge of
the relay path left
cabinet)
reference (Front edge of
the relay path left
cabinet)
Cushion A attachment
reference (Upper side of
the groove in the relay
path left cabinet)
reference (Upper side of
the groove in the relay
path left cabinet)
Cushion B attachment
reference (Upper edge
of the machine left
cabinet)
reference (Upper edge
of the machine left
cabinet)
Cushion B attachment
reference (Rear edge of
the handle hole)
reference (Rear edge of
the handle hole)
Cushion C attachment
reference (Front edge of
the upper cushion)
reference (Front edge of
the upper cushion)
Cushion C attachment
reference (Upper edge of the
machine left lower cabinet)
reference (Upper edge of the
machine left lower cabinet)
Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 (serv.man4) service manuals if exist.