Read Sharp MX-FN19 / MX-FN20 / MX-PN12 (serv.man3) Service Manual online
MX-7040N MX-PN12A/B/C/D (PUNCH MODULE) 15 – 4
E. Adjustment
Refer to the adjustment procedure of each finisher.
F. Touch of the auxiliary caster with the floor
Refer to the procedure for touch of the auxiliary caster with the floor
of each finisher.
of each finisher.
G. Install to main unit
1)
Engage the finisher that has installed punch unit to the main
unit.
unit.
2)
Fix the main unit and the punch unit with the fixing screw
(Package part of MX-FN19, MX-FN20).
(Package part of MX-FN19, MX-FN20).
3)
Install the fixing screw (Package part of MX-FN19, MX-FN20)
on rear side.
on rear side.
4)
Install the rear cover of punch unit with the fixing screws.
NOTE: Be careful not to damage to the harness at the installa-
tion.
5)
By using nippers, split the removed connector cover of the fin-
isher along the perforated line.
isher along the perforated line.
6)
Install the connector cover of the finisher and fix it with the fix-
ing screw.
ing screw.
Click on the first or last page to see other MX-FN19 / MX-FN20 / MX-PN12 (serv.man3) service manuals if exist.