Read Sharp MX-FN17 / MX-PN11 Service Manual online
MX-FN17 OPERATIONAL DESCRIPTIONS 6 – 9
2. General
This chapter describes operations of the inner finisher. The major operation modes are as follows:
• Non-sort mode
• Offset mode
• Staple mode
• Non-sort mode + punch
• Offset mode + punch
• Staple mode + punch
In this chapter, the basic operations of the non-sort mode, the offset mode, and the staple mode are described.
• Non-sort mode
• Offset mode
• Staple mode
• Non-sort mode + punch
• Offset mode + punch
• Staple mode + punch
In this chapter, the basic operations of the non-sort mode, the offset mode, and the staple mode are described.
3. Outline of the transport path
The outline of the path is shown below.
No.
Name
No.
Name
1
Tray
9
Punch pin
2
Bundle exit roller
10
Punch timing sensor FPTS (FPPEND)
3
Paddle
11
Main unit paper exit roller
4
Alignment plate
12
Stapler
5
Paper exit roller
13
Paper stopper
6
Scrape belt
14
Staple tray paper detector FSTPD (FSTPD)
7
Paper pass detector FPPD1 (FED)
15
Paper holding lever
8
Inlet port roller
1
8
9
2
7
12
13
14
15
11
10
6
4
3
5
Click on the first or last page to see other MX-FN17 / MX-PN11 service manuals if exist.