Read Sharp MX-FN17 / MX-PN11 Service Manual online
MX-FN17 OPERATIONAL DESCRIPTIONS 6 – 4
Signal name
Name
Function/Operation
FAPHPS_F (JHPS1)
Paper alignment plate HP sensor F
Detects the home position of the front side alignment guide.
FAPHPS_R (JHPS2)
Paper alignment plate HP sensor R
Detects the home position of the rear side alignment guide.
FPAM_F (J1_MOT)
Paper alignment motor F
Shifts the F side alignment guide in the F/R direction.
FPAM_R (J2_MOT)
Paper alignment motor R
Shifts the R side alignment guide in the F/R direction.
FSED (LS)
Staple empty detector
Detects staple empty. (Stapler unit built-in sensor)
FSHPS (*HP)
Staple HP sensor
Detects the stapler home position. (Stapler unit built-in sensor)
FSLD (*READY)
Staple lead detector
Detects that staple feed is completed and stapling is ready. (Staple unit built-in sensor)
FSM (STP_MOT)
Stapler motor
Drives the stapler. (Stapler unit built-in motor)
FSSHPS (STHPS)
Stapler shift home position sensor
Detects the stapler unit home position in the F/R direction.
FSSM (ST_MOT)
Stapler shift motor
Shifts the stapler unit in the F/R direction.
FSSS (JIS)
Staple safety sensor
Detects the stopper position at the rear edge of the process section. (Prevents stapling at
the stopper position at the rear edge of the process section.)
the stopper position at the rear edge of the process section.)
FSTPD (EMPS)
Staple tray paper detector
Detects paper empty on the process tray.
Click on the first or last page to see other MX-FN17 / MX-PN11 service manuals if exist.