MX-FN15, MX-FN16. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 9

Read Sharp MX-FN15 / MX-FN16 Service Manual online

CHAPTER 1   GENERAL DESCRIPTION
1-2
II. SPECIFICATIONS
A.
Finisher specifications (MX-FN15/FN16)
1.
Finisher (MX-FN15)
(1) Stack section
Type
Floor installation
Stacking method
Upper/Lower tray: Ascent/descent type offset tray
Transport speed
62 to 70 sheet/minute 
Tray type
Upper/Lower Tray
Ascent/descent type offset tray
Output paper size
AB series
A4, B5, A5R, 16K, A3, B4, A4R, B5R, 8K, 16KR
Inch series
8.5 x 11, 5.5 x 8.5R, 11 x 17, 8.5 x 14, 8.5 x 13.5, 
8.5 x 13.4, 8.5 x 13, 8.5 x 11R, 7.25 x 10.5R
Paper weight
Plain paper: 60 to 105 g/m
2
Thick paper: 106 to 256 g/m
2
Paper transport 
reference
Center reference
Mode type
Non-staple, staple 
Offset paper size
A3, A4, A4R, B4, B5, 8K, 16K, 11 x 17, 8.5 x 14, 8.5 x 13.5, 8.5 x 13.4, 
8.5 x 13, 8.5 x 11, 8.5 x 11R
Offset volume
30mm
Stacking performance
Non-offset
In horizontal direction: max. 30mm
In vertical direction: max. 50mm 
(In the non-staple mode on the offset tray)
Offset
In horizontal direction:
15mm or less for a same set,
15mm or more between different sets 
Matching
Max. deviation width 
2.5mm
Output paper capacity
<Upper tray / Lower tray>
Non-staple:
Equivalent to 2000 sheets (250mm ± 7mm)
A4, B5, A5R, 16K, 8.5 x 11, 5.5 x 8.5R: 80g/m
2
Equivalent to 1000 sheets (140mm ± 7mm)
A3, B4, A4R, B5R, 8K, 16KR, 11 x 17, 8.5 x 14, 8.5 x 13.5, 8.5 x 13.4, 
8.5 x 13, 8.5 x 11R, 7.25 x 10.5R: 80g/m
2
Stacking limit:
Upper tray: Stack capacity from Upper tray & Lower tray = less than 2000 
sheets
Lower tray: Stack capacity from Lower tray = less than 2000 sheets
Staple:
110mm ± 7mm or 750 sheets or 100 sets
A4, B5, 8.5 x 11, 16K (S size)
74mm ± 7mm or 500 sheets or 100 sets
A3, B4, A4R, 11 x 17, 8.5 x 14, 8.5 x 13.5, 8.5 x 13.4, 8.5 x 13, 8.5 x 11R, 8K 
(L size)
Page of 127
Display

Click on the first or last page to see other MX-FN15 / MX-FN16 service manuals if exist.