Read Sharp MX-EB11 / MX-EB12 Service Manual online
MX-7040N MX-EB11 (ENHANCED COMPRESSION KIT) 28 – 2
C. Attach the MFP control unit
1)
Insert the MFP control unit into the main unit.
2)
Connect the interface cable to the MFP control PWB.
3)
Push the interface cable into the recessed portion of the sheet
metal on the MFP control unit.
metal on the MFP control unit.
4)
Fix a snap band with the screw.
MEMO: The step 2), 3) and 4) are required only when FAX unit
is installed.
MEMO: The step 2), 3) and 4) are required only when FAX unit
is installed.
5)
Attach the MFP control unit into the main unit, and fix the
screw.
screw.
6)
Attach the right rear cabinet, and fix the screw.
MEMO: Pass the I/F cable through an opening in the right rear
cabinet if FAX unit is installed.
MEMO: Pass the I/F cable through an opening in the right rear
cabinet if FAX unit is installed.
D. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
E. Confirmation of connection
1)
Execute SIM22-10 to check to confirm that the combined
machine recognizes the MX-EB11.
machine recognizes the MX-EB11.
1
2
3
2
2
1
2
1
Display
