MX-CF10. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 2

MX-CF10  PRODUCT OUTLINE  1 - 1

This inserter is an optional unit for the MX-M623/M753 series of digital
complex machines.  With the inserter installed, blank sheets or printed
sheets can be inserted as covers (made of cardboard) or tabbed
sheets without being subject to the printing process (and without pass-
ing through a fixing unit).  When the inserter is combined with a finisher
(optional) and a punch unit (optional), printed sheets can proceed to
the hole punching or stapling process without being subject to the
copying process (or without passing through the main unit).

Type of Installation

Floorstanding

Delivery speed

Through mode 
(Horizontal transportation):

800mm/sec

Straight mode:

800mm/sec

Saddle mode (Reverse):

420mm/sec

Productivity

50 cpm (when A4 or letter-sized insert sheets 
are continuously transported/saddle mode not 
applicable)

Transport 
reference

Center reference through (when horizontally 
transported)

Loading capacity

100 sheets max. (80 g/m

2

 or less)

Maximum loading height:

12 mm (80g/m

2

 or 

greater)

Maximum loadable sheets: 30 (127g/m

2

 or 

greater)

Factor 0.6 or less applied to above limitations 
for special papers

Offline function

Provided

Manual operation 
section

Equipped with keys and LEDs

Stapling

Possible

Saddle stitching 
(With folding)

Possible

Punching

Possible

Paper jam handling

Paper feed/Transport unit

Paper feeding 
cover open/close

Horizontal transport unit

Transportation 
guide open/close

Paper weight

60 – 256gm

2

 (Normal paper, whose thickness 

should be less than 256

μm)

Types

Normal paper, special paper (OHP films, colored 
paper, punched paper, tabbed paper)

Special papers

OHP films: Saddle mode (reverse) not applicable

Punched paper: 2, 3, or 4 holes

2 holes (

φ6.5): Hole pitch: 80mm

2 holes (

φ8):

Hole pitch: 70mm

3 holes (

φ8):

Hole pitch: 108mm+108mm

4 holes (

φ6.5): Hole pitch: 

80mm+80mm+80mm

4 holes (

φ6.5): Hole pitch: 

21mm+70mm+21mm

Paper sizes

Ledger (LD), Legal (LG), Letter (LT), Letter R 
(LTR), Foolscap, Executive R, Invoice R

Size detection

The 3 destinations below are user-definable

cm:

A3, B4, A4, A4R, B5, B5R, A5R
(Foolscap is manually specified on the 
operation panel of main unit)

inch:

LD, LG, LT, LTR, Executive R, Invoice R

∗ Mixed loading is not possible. When offline, sta-

pling and punching are possible only for papers
that have the identical width (A3 and A4, B4 and
B5, LD and LT). Note that compatibility with the
finisher is not considered.

Paper sizes that 
can be stapled

Compliant with the specifications both of the main 
unit and the finisher.

Paper sizes that 
can be saddle 
stitched

Compliant with the specifications both of the main 
unit and the saddle finisher.

Paper sizes that 
can be punched

Compliant with the specifications both of the main 
unit and the punch unit.

External 
dimensions

Product 
dimensions

(W) 270 x (D) 583 x (H) 1113 mm
∗ Latch unit and tray unit 

excluded.

Packaged 
dimensions

(W) 1295 x (D) 680 x (H) 516 mm

Footprint

(W) 270 x (D) 583 mm
∗ Latch unit and tray unit 

excluded.

Weight

Product weight

Approx. 23kg

Package weight

Approx. 32kg

Item enclosed

Inserter: 1

Input voltage

Supplied from the main unit
DC+24V ± 10%
DC +5V ± 5%

Power consumption

DC+24V: 58.3W max.
DC +5V: 1.1W max.

Operating 
conditions (normal 
operation)

Temperature

5 – 35°C

Humidity

20 – 85%RH (No condensing)

Transport/storage 
environment

Temperature

–20 – 50°C

Humidity

10 – 90%RH (No condensing)

Safety standard

UL: 60950 the 3rd edition
C-UL: CAN/CSA-C22. 2 No.60950 the 3rd edition
CE: EN60950 ITS (German GS mark)

Electromagnetic 
Compliance

VCCI: Class B
FCC: Class B
CE: EN50081-1 EN55024