Read Sharp MX-C310 / MX-C311 / MX-C312 / MX-C380 / MX-C381 / MX-C400 / MX-C401 (serv.man125) Service Manual online
MX-C401 List of simulation codes 5 – 10
63
1
Used to display the shading correction result.
Scanner
2
Used to perform shading.
3
Used to perform scanner (CCD) color balance and gamma auto adjustment.
Scanner
4
Used to display the SIT chart patch density.
5
Used to perform the scanner (CCD) color balance and gamma default setting.
6
Used to display the scan level and the density level of the copy color balance adjustment patch.
7
Used to register the service target of the copy mode auto color balance adjustment.
8
Used to set the default of the service target of the copy mode auto color balance adjustment.
11
Used to set the target color balance of the copy mode auto color balance adjustment.
64
1
Test print. (Self print) (Color mode)
2
Test print. (Self print) (Monochrome mode)
4
Printer test print. (Self print) (256 gradations)
5
Printer test print. (Self print) (PCL)
6
Printer test print. (Self print) (PS)
7
Used to print the adjustment pattern of the test print. (Self print).
(The adjustment pattern of SIM46-21 is printed.)
(The adjustment pattern of SIM46-21 is printed.)
65
1
Used to adjust the touch panel (LCD display section) detection coordinates. (8.5/7.0 Inch LCD model only)
Operation panel section
2
Used to display the touch panel (LCD display section) detection coordinates. (8.5/7.0 Inch LCD model only)
5
Used to check the operation panel key input.
67
17
Used to reset the printer controller.
Printer
24
Printer color balance adjustment (Auto adjustment)
Printer
25
Printer color balance adjustment (Manual adjustment)
Printer
26
Used to set the target color balance of the printer mode auto color balance adjustment.
Printer
27
Used to set the service target of the printer mode auto color balance adjustment.
Printer
28
Used to set the default of the service target of the printer mode auto color balance adjustment.
Printer
31
Used to clear the printer calibration value.
Printer
33
Used to change the gamma of the printer screen. (for PCL/PS)
Printer
34
Used to set the density correction in the printer high density section. (Support for the high density section
tone gap)
tone gap)
Printer
36
Used to adjust the density in the low density section.
Printer
52
Used to reset the printer color balance adjustment (adjustment for each dither) to the default value. (The set
values of SIM67-54 and SIM67-33 are set to the default values.)
values of SIM67-54 and SIM67-33 are set to the default values.)
54
Printer color balance adjustment (Automatic adjustment for each dither)
70
MFP PWB SRAM data clear
MFP PWB
Main
Sub
Functions
Section
Click on the first or last page to see other MX-C310 / MX-C311 / MX-C312 / MX-C380 / MX-C381 / MX-C400 / MX-C401 (serv.man125) service manuals if exist.