Read Sharp MX-C301 / MX-C301W (serv.man5) Service Manual online
MX-C301 ADJUSTMENTS 5 – 79
ADJ 12
Fusing paper guide position
adjustment
adjustment
Normally there is no need to perform this adjustment. In the follow-
ing cases, perform this adjustment.
ing cases, perform this adjustment.
* When a paper jam occurs in the fusing section.
* When wrinkles are made on paper in the fusing section.
* When an image deflection or an image blur is generated in the
paper rear edge section.
1)
Change the screw position of the fusing paper guide by refer-
ring the figure.
ring the figure.
2)
The standard fixing position is the center part of the screw
holes. Change the position according to the situation.
holes. Change the position according to the situation.
* When wrinkles are generated on paper, change the position
in the arrow direction B.
* When an image deflection or an image blur is generated in
the paper rear edge section, change the position in the
arrow direction A.
arrow direction A.
Normally, the hole on the fusing paper guide standard fixing
position is used to fix the fusing paper guide.
position is used to fix the fusing paper guide.
Standard position
+1.0mm
-1.0mm
+0.5mm
-0.5mm
(-) direction is the direction close to the heating roller.
(+) direction is the direction which gets away from
the heating roller.
the heating roller.
Fixed at the standard position
Fusing paper guide
Fixed at the +0.5mm position from the standard position
Fixed at the -1.0mm position from the standard position
A (+) direction
B (-) direction
Click on the first or last page to see other MX-C301 / MX-C301W (serv.man5) service manuals if exist.