Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man2) Handy Guide online
51
Resist Roller Adjustment
1
Secondary transfer voltage ON
timing adjustment
timing adjustment
2
Resist roller adjustment
53
Document Feeder Adjustment
8
SPF scanning position adjustment
9
SPF dirt detection setting
10 SPF dirt detection execution
55
MFP Data Setting
1
Engine soft switch setting
2
Scanner soft switch setting
3
Controller soft switch setting:-
SW1-5 Auto clear function before copy
job execution:-
0 =Disabled, 1 = Enabled
SW3-6 Process mixed original size
printing for duplex mode:-
0 =Disabled, 1 = Enabled
0 =Disabled, 1 = Enabled
SW3-7 HP Compatibility Mode:-
0 =Disabled, 1 = Enabled
SW9-6 Duplex binding:-
0 = Binding OFF (Default)
1 = Binding ON
1 = Binding ON
56
MFP Data Import & Export
2
Export/Import EEPROM/SD Card &
HDD data
HDD data
5
Export Adjustment & Settings data to USB
60
Memory Operation & Test
1
SDRAM read/write test (MFP PWB)
61
LSU Writing Adjustment/Test
1
LSU test (Polygon & BD detection check)
3
LSU power auto setup
4
LSU position adjustment (CMYK)
11 Document filing data deletion
12 Enable/disable auto format for HDD
trouble
13 HDD format (manual area only)
14 Delete document filing management data
63
CCD Operation & Adjustment
1
Shading correction data display
2
Shading correction execution (force)
3
CCD gamma & colour correction adjust.
SHARP
Document Solution Centre
Test Simulation
63
CCD Operation & Adjustment
5
CCD gamma & colour correction reset.
12 B/W Image (RGB) ratio for lamp adjustment
64
Self Test Print
1
Test print (Colour mode)
2
Test print (B/W mode)
4
Printer self print test
5
Printer self print test (PCL)
6
Printer self pint test (PS)
65
LCD Operation & Adjustment
10 Displays key standby time
66
Fax Control Settings & Adjustments
1
Fax Soft SW setting
2
Country code default set (Fax)
4
Fax signal line check (Max level)
7
Fax memory printout (all data)
8
Fax sound message setup
10 Fax all memory clear
11 Voice signal check (line/speaker 300bps)
13 Register dial number for Sim 66-14/15/16
11 Voice signal check (line/speaker 300bps)
13 Register dial number for Sim 66-14/15/16
17 DTFM signal to send to line (Max level)
21 Print various registration information
30 Tel/LIU sensor status check
30 Tel/LIU sensor status check
31 ON/OFF setting of output port (Tel/LIU)
32 Received data check (comparison)
33 Busy Tone/CNG/CED/FNET detect check
34 Display time required for sending test data
67
Printer Settings & Adjustments
25 Printer half tone colour adjustment
31 Printer calibration data clear
31 Printer calibration data clear
33 Printer screen gamma adjust. (PCL/PS)
34 Engine maximum adjustment mode for
34 Engine maximum adjustment mode for
printer
36 Adjust low density section
52 Printer default gamma check (PCL/PS)
23
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man2) service manuals if exist.