Read Sharp MX-B382 (serv.man4) Handy Guide online
Repair Hints
50
SHARP
Document Solution Centre
DATA SECURITY KIT
MX-FR26U
MX-B382P
MODEL NOT MATCH error after
installing the MX-FR26U Data Security
Kit
This error is caused by a DSK Boot Rom defect.
Download corrective DSK Firmware from the support
website (Repair Hints) and perform an emergency
update procedure.
SHARP OSA
MX-B382
Is it possible to activate a trial mode
for Sharp OSA?
Sharp OSA trial mode that supports most functions can
be enabled by executing Sim 26-74 - (restricted to
approx. 18000 pages, including print/scan/copy/image
send)
Note: Metadata & Open USB are not supported in Trial
Mode.
PRINTER
MX-B382
MX-B382P
Zeroconfig appears on NIC status
page
Conflicting IP Address with another device/pc on the
network
– re-assign IP Address.
Incorrect orientation when printing
mixed size originals from Microsoft
Word.
Change the following soft switch control:-
Sim 55-03 SW3-6, Change from 0 to 1
0 = Does not process mixed originals of 1 sided/2 sided
within a print job [default].
1 = Processes mixed originals within a print job.
within a print job [default].
1 = Processes mixed originals within a print job.
Can the Ethernet speed of the MX
series be fixed?
To fix the Ethernet speed, enter Sim 55-03 and change
SoftSW 6 as follows:-
SW6-1
Auto-Negotiation
0 = Enable, 1 = Disable
SW6-2:
Link Speed (when auto-negotiation is Disabled)
0 = 100Base TX, 1 = 10Base T
SW6-3:
Duplex Mode (when auto-negotiation is Disabled)
0 = Full, 1 = Half
SW6-4:
Link Speed (for 10/100 or 1000Base setting)
0 = 10/100Base TX, 1 = 1000Base T
Click on the first or last page to see other MX-B382 (serv.man4) service manuals if exist.