Read Sharp MX-7090N / MX-8090N (serv.man3) Service Manual online
MX-8090N MX-7090N/8090N (MAIN UNIT) 2 – 11
6) Install the rear end regulation plate F and R, and fix with the
screw.
7) Remove the screw, and remove the mylar sheet. Change the
installing direction and install with screws. (2 positions)
8) Open the right lower door.
9) Remove the B5 size regulation plate.
9) Remove the B5 size regulation plate.
10) Install the B5 size regulation plate to the tray 1.
11) Attach the A4 size regulation plate to inner side of the right
lower door.
12) Close the right lower door.
13) Close the tandem paper feed tray.
c. Tray 3, Tray 4
1) Pull out the paper tray.
13) Close the tandem paper feed tray.
c. Tray 3, Tray 4
1) Pull out the paper tray.
Gently pull the tray out until it stops.
If paper remains in the tray, remove it.
If paper remains in the tray, remove it.
2) Adjust the guide plates A and B by squeezing their lock levers
and sliding them to match the vertical and horizontal dimen-
sions of the paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
1
1
2
2
3
3
A
B
Click on the first or last page to see other MX-7090N / MX-8090N (serv.man3) service manuals if exist.