MX-7090N, MX-8090N (serv.man3). Installation Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 127

MX-8090N  MX-CF11 (INSERTER)  16 – 4

3)

Push up the lock lever to lock the unit and the decurler unit.
Use the removed screw to fix the lock lever.

MEMO: If they cannot be locked, follow the installing proce-
dures (height adjustment) of the complex machine and options
to adjust the height.

1)

Loosen the screw of the fall-prevention stay, and store the
stay.

For installation of the tray unit, use manpower of two or more per-
sons.

1)

Remove the rear cover of the tray unit.

2)

Hold the grip of the unit to install it to the inserter.

NOTE: When the tray unit is inserted, the machine becomes

unstable. In order to prevent against falling, therefore,
connect the after-process mechanism (the finisher,
etc.) the fall-prevention to the left side of the inserter
and put the tray unit on it.

3)

Attach the screw (Packed items No. 16) .

4)

Connect five connectors.

5)

Remove the front inner cover. (2 screws)

6)

Fix the tray unit. (2 screws (Packed items No. 16))

 

 

Fall-prevention stay

Rear cover

Plate grip (Used for installation)

 

Plate grip

Grip

Screw (M4 x 12)

 

Connect five connectors.

 

Front inner cover

Tray unit

Screw (M4 x 12)