Read Sharp MX-7090N / MX-8090N (serv.man3) Service Manual online
MX-8090N MX-RB17 (CONNECTION MODULE) 10 – 2
4)
Remove the step screws in the back on top of the 2nd tray on
both right and left sides.
both right and left sides.
5)
Pull the slide rails out.
6)
Place this unit on the rails.
7)
Place the screw holes for this unit and the slide rails to the
same location and tighten them together with 2 types of
screws.
(Right side: No.4 x2; left side: No.5 x2)
same location and tighten them together with 2 types of
screws.
(Right side: No.4 x2; left side: No.5 x2)
Stick the label (Packed items No.6) to the lower paper cassette
as shown in the picture below.
as shown in the picture below.
8)
Close the 2nd tray and fix the front door.
9)
Remove the cover fixing screw in the lower right side of the
first-series LCT, and attach the height adjustment mounting
plates (F/R) with the screws (Packed items No.5 x2).
first-series LCT, and attach the height adjustment mounting
plates (F/R) with the screws (Packed items No.5 x2).
Step screw
Step screw
Click on the first or last page to see other MX-7090N / MX-8090N (serv.man3) service manuals if exist.