Read Sharp MX-6500N / MX-7500N (serv.man24) Service Manual online
MX-7500N DISASSEMBLY AND ASSEMBLY 10 – 10
4)
Remove the screw, and remove the harness cover. Disconnect
the connector.
the connector.
CAUTION: When assembling, arrange the harness so that it height
is lower than the rib height.
5)
Remove the screw, and remove the optical fixing plate.
Remove the optical unit.
Remove the optical unit.
(9)
Drive unit
1)
Remove the rear cabinet.
2)
Disconnect the connector. Remove the clutch stopper, and
remove the No.1 registration roller clutch.
remove the No.1 registration roller clutch.
CAUTION: When assembling, check to confirm that the clutch stop-
per section is engaged with the plate.
3)
Disconnect the connector, and open the edge saddle. Remove
the snap band.
the snap band.
4)
Remove the screw, and remove the drive unit.
(10) Transport drive unit
1)
Remove the rear cabinet.
2)
Disconnect the connector. Remove the clutch stopper, and
remove the No.1 registration roller clutch.
remove the No.1 registration roller clutch.
CAUTION: When assembling, check to confirm that the clutch stop-
per section is engaged with the plate.
1
2
3
3
4
1
2
2
3
3
2
1
2
3
1
1
2
1
2
1
1
1
3
2
1
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man24) service manuals if exist.