Read Sharp MX-6240N / MX-7040N (serv.man25) Service Manual online
MX-7040N SIMULATION 6 – 125
62-12
Purpose
Setting
Function (Purpose)
Used to set Enable/Disable of auto format
in a hard disk trouble.
in a hard disk trouble.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value is saved.
When it is set to Enable, if a read error of HDD occurs in the system
data storage area (FAX/device cloning data, etc.), only the system
data storage area is cleared.
data storage area (FAX/device cloning data, etc.), only the system
data storage area is cleared.
62-13
Purpose
Data clear
Function (Purpose)
Used to format the hard disk. (Operation
Manual, watermark data only)
Manual, watermark data only)
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The operation manual data are deleted.
When the operation is completed, [EXECUTE] key returns to the
normal display.
normal display.
62-14
Purpose
Data clear
Function (Purpose)
Used to delete the document filing manage-
ment data.
ment data.
Section
HDD
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The document filing management data are cleared.
At the same time, the job log data are also cleared.
This simulation is executed in the following trouble cases.
* The document filing function does not work normally.
* The job log is not recorded normally.
NOTE:
This simulation may not function with some firmware versions.
In such a case, the firmware must be upgraded to the latest ver-
sion.
sion.
62-20
Purpose
Operation test/check
Function (Purpose)
Used to check the operation of the mirror-
ing hard disk.
ing hard disk.
Section
Mirroring hard disk
Operation/Procedure
Enter the simulation mode, and the operation status of the HDD is
displayed.
displayed.
The status display is renewed in every second.
63
63-1
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to display the shading correction
result.
result.
Section
Scanner
Operation/Procedure
1)
Select a target color to display with [R] [G] [B] on the touch
panel.
panel.
Item
Content
Default value
A
0
Enable
1
1
Disable
Display
Content description
OK
Normal operation
NONE
Not connected
REBUILDING
Data rebuilding
ERROR
Error occurrence
TROUBLE
Trouble
Button
Display
item
Description
Remarks
OC
ANALOG
GAIN ODD
GAIN ODD
Analog gain
adjustment value
(odd number)
adjustment value
(odd number)
ANALOG
GAIN
EVEN
GAIN
EVEN
Analog gain
adjustment value
(even number)
adjustment value
(even number)
DIGITAL
GAIN ODD
GAIN ODD
Digital gain
adjustment value
(odd number)
adjustment value
(odd number)
DIGITAL
GAIN
EVEN
GAIN
EVEN
Digital gain
adjustment value
(even number)
adjustment value
(even number)
SMP AVE
ODD
ODD
Reference plate
sampling average
value (odd number)
sampling average
value (odd number)
SMP AVE
EVEN
EVEN
Reference plate
sampling average
value (even number)
sampling average
value (even number)
TARGET
VALUE
VALUE
Target value
BLACK
LEVEL
LEVEL
Black output level
ERROR
CODE
CODE
Error code (0, 1 - 14)
0:
No error
1:
STAGE1. Loop
number over
number over
2:
STAGE2. The
target value is less
than the specified
level.
target value is less
than the specified
level.
3:
STAGE3. The gain
set value is
negative.
set value is
negative.
4:
END is not
asserted. (Gain
adjustment)
asserted. (Gain
adjustment)
5:
(reserve)
6:
STAGE2.
Underflow
Underflow
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man25) service manuals if exist.