MX-6240N, MX-7040N (serv.man24). Section 5 Adjustments and Settings - Updated November 2012 - Sharp Copying Equipment Service Manual (repair manual). Page 19

Read Sharp MX-6240N / MX-7040N (serv.man24) Service Manual online

MX-7040N  ADJUSTMENTS AND SETTINGS  5 – 19
(Reference adjustment value)
1 scale/1 (When the set value is changed by 1, shift is made by 1
scale.)
If there is a considerable difference in color shift in the square and
at the center area, perform the adjustment.
Select an adjustment item (OFF SET X F / OFF SET X R / OFF
SET X S), and change the adjustment value to adjust.
OFF SET X F: F side main scanning direction registration offset set
value (The color shift on the F side and at the center area is
changed.)
OFF SET X D: R side main scanning direction registration offset set
value (The color shift on the R side and at the center area is
changed.)
OFF SET X S: Sub scanning direction registration offset set value
(Color is shifted to the sub scanning direction overall.)
CAUTION: When the adjustment value of OFF SET X F and OFF
SET X R are changed, the color at the center area will
be affected. Consider this when executing the adjust-
ment.
(Adjustment conditions and method)
To adjust evenly overall, adjust so that the color shifts on the F side,
the R aide and at the center are of the same level.
To adjust with the center area most focused, adjust so that the color
shift at the center becomes smaller than that on the F side and the
R side.
When the offset adjustment value is 0, if the color registration
adjustment (automatic adjustment) is performed, the color shift on
the F side and that on the R side are automatically adjusted to be
smaller than that on the center area.
 
ADJ 5
Scan image distortion 
adjustment 
(Document table mode)
This adjustment must be performed in the following cases:
* When the scanner (reading) section is disassembled.
* When the copy image is distorted.
 
5-A
Scanner (reading) unit parallelism 
adjustment
Before execution of this adjustment, remove the document table
glass.
1)
Remove the lamp unit, and then loosen the screws which are
fixing the scanner unit A and the drive wire. Release the scan-
ner unit A from the drive wire.
Display/Item
Content
Adjustment 
value range
Default 
value
A
CYAN
(FRONT)
Image registration adjustment 
value (Main scanning 
direction) (Cyan) (F side)
1 - 399
200
B
CYAN
(REAR)
Image registration adjustment 
value (Main scanning 
direction) (Cyan) (R side)
1 - 399
200
C
MAGENTA
(FRONT)
Image registration adjustment 
value (Main scanning 
direction) (Magenta) (F side)
1 - 399
200
D
MAGENTA
(REAR)
Image registration adjustment 
value (Main scanning 
direction) (Magenta) (R side)
1 - 399
200
E
YELLOW
(FRONT)
Image registration adjustment 
value (Main scanning 
direction) (Yellow) (F side)
1 - 399
200
F
YELLOW
(REAR)
Image registration adjustment 
value (Main scanning 
direction) (Yellow) (R side)
1 - 399
200
G
CYAN
(SUB)
Image registration adjustment 
value (Sub scanning 
direction) (Cyan)
1 - 399
200
H
MAGENTA
(SUB)
Image registration adjustment 
value (Sub scanning 
direction) (Magenta)
1 - 399
200
I
YELLOW
(SUB)
Image registration adjustment 
value (Sub scanning 
direction) (Yellow)
1 - 399
200
J
OFFSET 
CF
Image registration offset 
adjustment value (Main 
scanning direction) (Cyan) 
(F side)
1 - 99
50
K
OFFSET 
CR
Image registration offset 
adjustment value (Main 
scanning direction) (Cyan) 
(R side)
1 - 99
50
L
OFFSET 
MF
Image registration offset 
adjustment value (Main 
scanning direction) (Magenta) 
(F side)
1 - 99
50
M
OFFSET 
MR
Image registration offset 
adjustment value (Main 
scanning direction) (Magenta) 
(R side)
1 - 99
50
N
OFFSET 
YF
Image registration offset 
adjustment value (Main 
scanning direction) (Yellow) 
(F side)
1 - 99
50
O
OFFSET 
YR
Image registration offset 
adjustment value (Main 
scanning direction) (Yellow) 
(R side)
1 - 99
50
P
OFFSET 
CS
Image registration offset 
adjustment value (Sub 
scanning direction) (Cyan)
1 - 99
50
Q
OFFSET 
MS
Image registration offset 
adjustment value (Sub 
scanning direction) (Magenta)
1 - 99
50
R
OFFSET 
YS
Image registration offset 
adjustment value (Sub 
scanning direction) (Yellow)
1 - 99
50
Display/Item
Content
Adjustment 
value range
Default 
value
Page of 99
Display

Click on the first or last page to see other MX-6240N / MX-7040N (serv.man24) service manuals if exist.