Read Sharp MX-6201N / MX-7001N (serv.man41) Service Manual online
MX-7001N DRIVE SECTION Q – 4
c. Y phase detection, M phase detection, C phase detection
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C). Remove the flywheel (D), the flywheel
(E).
* When installing, check to confirm that has not come in con-
(E).
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the flywheel (D). (Equipping the mark to each color.)
4)
Remove the connector (F). Remove the screw (G), and
remove the duct unit (H).
remove the duct unit (H).
5)
Remove the screw (I), and remove the flywheel (J).
* When installing, check to confirm that has not come in con-
* When installing, check to confirm that has not come in con-
tact with the harness etc.
6)
Remove the screws (K), and remove the phase detections (L)
of each color. Disconnect the connectors (M).
of each color. Disconnect the connectors (M).
Unit
Parts
1
Main drive unit (CL)
e
Y phase detection
f
M phase detection
g
C phase detection
1-e
1-f
1-g
B
A
A
D
E
C
F
H
G
G
I
J
K
L
M
L
L
L
1-e
1-f
1-g
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man41) service manuals if exist.