Read Sharp MX-6201N / MX-7001N (serv.man41) Service Manual online
MX-7001N DRIVE SECTION Q – 2
4)
Remove the connector (F). Remove the screw (G), and
remove the duct unit (H).
remove the duct unit (H).
5)
Disconnect the connectors (I). Remove the harness (K) from
the wire saddles (J). Remove the screws (L), and remove the
main drive unit (CL) (M).
the wire saddles (J). Remove the screws (L), and remove the
main drive unit (CL) (M).
a. Developement drive motor_CL
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C), and remove the flywheel (D) and (E).
* When installing, check to confirm that has not come in con-
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the flywheel (D). (Equipping the mark to each color.)
4)
Disconnect the connector (F). Remove the screws (G), the
supporter (H) and remove the developement dirve motor_CL
(I).
supporter (H) and remove the developement dirve motor_CL
(I).
Unit
Parts
1
Main drive unit (CL)
a
Developement dirve motor_CL
F
H
G
G
M
1
I
L
J
J K
I
1-a
B
A
A
D
E
C
G
F
F
I
1-a
H
G
G
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man41) service manuals if exist.