MX-6201N, MX-7001N (serv.man40). PAPER EXIT SECTION - Sharp Copying Equipment Service Manual (repair manual). Page 2

MX-7001N  PAPER EXIT SECTION  P – 2

• Paper transported from the fusing section is passed to the trans-

port roller 9 which is driven by the fusing motor and to the paper
exit roller 1, then discharged to the inner tray.

• When paper is discharged to the right tray, it is passed to the

paper exit roller 1 and the paper exit motor is reversely rotated,
and paper is passed over the ADU reverse gate and the right
paper exit gate, and discharged to the right tray.

1)

Remove the fusing unit. (Refer to the "[O] FUSING SEC-
TION".)

2)

Remove the paper holding arm (A), and remove the paper exit
full detection actuator (B).

3)

Remove the screws (C). Disengage the pawl (D), and remove
the cover (E).

4)

Disconnect the connector (F). Remove the screws (G), and
remove the paper exit unit (H).

1

Paper exit 
unit

a

Paper exit motor

–

P - 3

b

Paper exit cooling fan motor 
(F side)

–

P - 3

c

Paper exit cooling fan motor 
(Center)

–

d

Paper exit full detection 
(Main unit)

–

P - 4

e

Paper exit detection

–

f

Paper exit roller 1 (Drive)

✕ {

P - 4

g

Paper exit temperature 
detection PWB

–

P - 5

h

Discharge brush

✕

P - 5

1

Paper exit unit