Read Sharp MX-6201N / MX-7001N (serv.man27) Service Manual online
MX-7001N DSPF SECTION C – 17
C. Upper transport section
(1) DSPF No.1 resist roller brake clutch, DSPF No.1
resist roller clutch
1)
Remove the rear cabinet. (Refer to the "A. Exterior section".)
2)
Disconnect the connectors (A). Remove the resin E-ring (B),
and remove the DSPF No.1 resist roller brake clutch (C) and
the DSPF No.1 resist roller clutch (D).
and remove the DSPF No.1 resist roller brake clutch (C) and
the DSPF No.1 resist roller clutch (D).
* When installing, check to insure that the clutch rotation stopper is
engaged with the plate.
(2) DSPF transport roller clutch
1)
Remove the rear cabinet. (Refer to the "A. Exterior section".)
2)
Disconnect the connector (A), and remove the snap band (B).
Remove the resin E-ring (C), and remove the DSPF transport
roller clutch (D).
Remove the resin E-ring (C), and remove the DSPF transport
roller clutch (D).
* When installing, check to insure that the clutch rotation stopper is
engaged with the plate.
Parts
Mainte
nance
Page
a
DSPF No.1 resist roller brake clutch
–
C -17
b
DSPF No.1 resist roller clutch
–
c
DSPF transport roller clutch
–
C -17
d
No.1 resist roller (Drive)
{
C -18
e
DSPF paper pass sensor 2
–
C -18
f
Transport roller 1 (Drive)
{
Parts
a
DSPF No.1 resist roller brake clutch
b
DSPF No.1 resist roller clutch
c
a
e
f
b
d
a
b
Parts
c
DSPF transport roller clutch
A
B
C
D
a
b
c
A
B
C
D
c
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man27) service manuals if exist.