Read Sharp MX-6201N / MX-7001N (serv.man20) Service Manual online
MX-7001N SELF DIAG AND TROUBLE CODE 8 – 24
H2-03
Non-contact thermistor
compensation thermistor open
(TH1_AD1)
compensation thermistor open
(TH1_AD1)
H2-04
External heating thermistor open
(TH_EX1)
(TH_EX1)
H2-05
Fusing external heating thermistor
open (TH_EX2)
open (TH_EX2)
H3-00
Fusing section high temperature
trouble (TH_UM)
trouble (TH_UM)
H3-01
Fusing section high temperature
trouble (TH_LM)
trouble (TH_LM)
H3-02
Sub thermistor fusing section high
temperature trouble (TH_US)
temperature trouble (TH_US)
H3-04
External heating thermistor high
temperature trouble (TH_EX1)
temperature trouble (TH_EX1)
Trouble content
Thermistor open
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection trouble, AC power
source trouble
section connector connection trouble, AC power
source trouble
Check and
remedy
remedy
Check the harness and the connector from the
thermistor to the control PWB.
thermistor to the control PWB.
Trouble content
Thermistor open
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection trouble, AC power
source trouble
section connector connection trouble, AC power
source trouble
Check and
remedy
remedy
Check the harness and the connector from the
thermistor to the control PWB.
thermistor to the control PWB.
Trouble content
Thermistor open
Section
PCU
Case 1
Cause
Fusing section connector and harness connection
trouble
trouble
Check and
remedy
remedy
Check the harness and the connector from the
thermistor to the PCU PWB.
thermistor to the PCU PWB.
Case 2
Cause
Thermistor trouble, PCU PWB trouble
Check and
remedy
remedy
Replace the thermistor or the PCU PWB.
Trouble content
The fusing temperature inside the PWB exceeds
the specified level.
the specified level.
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection error, AC power
source trouble
section connector connection error, AC power
source trouble
Check and
remedy
remedy
1)
Use SIM5-2 to check blinking of the heater
lamp.
lamp.
2)
If it blinks normally, check the thermistor and
the harness.
Check the control PWB thermistor input
circuit section.
the harness.
Check the control PWB thermistor input
circuit section.
3)
If the heater lamp keep lighting, check the AC
PWB and the control PWB lamp control
circuit.
PWB and the control PWB lamp control
circuit.
4)
Use SIM14 to cancel the trouble.
Trouble content
The fusing temperature inside the PWB exceeds
the specified level.
the specified level.
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection error, AC power
source trouble
section connector connection error, AC power
source trouble
Check and
remedy
remedy
1)
Use SIM5-2 to check blinking of the heater
lamp.
lamp.
2)
If it blinks normally, check the thermistor and
the harness.
Check the control PWB thermistor input
circuit section.
the harness.
Check the control PWB thermistor input
circuit section.
3)
If the heater lamp keep lighting, check the AC
PWB and the control PWB lamp control
circuit.
PWB and the control PWB lamp control
circuit.
4)
Use SIM14 to cancel the trouble.
Trouble content
The fusing temperature inside the PWB exceeds
the specified level.
the specified level.
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection error, AC power
source trouble
section connector connection error, AC power
source trouble
Check and
remedy
remedy
1)
Use SIM5-2 to check blinking of the heater
lamp.
lamp.
2)
If it blinks normally, check the thermistor and
the harness.
Check the control PWB thermistor input
circuit section.
the harness.
Check the control PWB thermistor input
circuit section.
3)
If the heater lamp keep lighting, check the AC
PWB and the control PWB lamp control
circuit.
PWB and the control PWB lamp control
circuit.
4)
Use SIM14 to cancel the trouble.
Trouble content
The external heating thermistor temperature
exceeds the specified temperature.
exceeds the specified temperature.
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection error, AC power
source trouble
section connector connection error, AC power
source trouble
Check and
remedy
remedy
1)
Use Sim44-14 to check if the thermistor
(TH_EX1) shows an abnormal temperature. If
the display is normal, use Sim5-2 to check
the blinking operation of the heater lamp.
a)
(TH_EX1) shows an abnormal temperature. If
the display is normal, use Sim5-2 to check
the blinking operation of the heater lamp.
a)
If it blinks normally, check the thermistor
and the harness.
Check the control PWB thermistor input
circuit section.
and the harness.
Check the control PWB thermistor input
circuit section.
b)
If the heater lamp keep lighting, check
the AC PWB and the control PWB lamp
control circuit.
the AC PWB and the control PWB lamp
control circuit.
2)
Use SIM14 to cancel the trouble.
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man20) service manuals if exist.