Read Sharp MX-6201N / MX-7001N (serv.man17) Service Manual online
MX-7001N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 2
B. Internal structure
No.
Name
Function/Operation
Remark
1
Paper pass unit
This transfers output to the finisher or saddle stitch finisher.
Option
2
Toner cartridges
These contain toner for printing. When the toner runs out in a
cartridge, the cartridge of the color that ran out must be
replaced.
cartridge, the cartridge of the color that ran out must be
replaced.
3
Fusing unit
Heat is applied here to fuse the transferred image onto the
paper.
paper.
The fusing unit is hot. Take care not to burn
yourself when removing a paper misfeed.
yourself when removing a paper misfeed.
4
Transfer belt
During full color printing, the toner images of each of the four
colors on each of the photoconductive drums are combined
together on the transfer belt.
During black and white printing, only the black toner image is
transferred onto the transfer belt.
colors on each of the photoconductive drums are combined
together on the transfer belt.
During black and white printing, only the black toner image is
transferred onto the transfer belt.
Do not touch or damage the transfer belt. This
may cause a defective image.
may cause a defective image.
5
Right side cover
Open this cover to operate the fusing unit pressure adjusting
lever and to remove a misfeed.
lever and to remove a misfeed.
6
Paper reversing section cover
This is used when 2-sided printing is performed. Open this
cover to remove a paper misfeed.
cover to remove a paper misfeed.
7
Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R, be sure
to pull out the bypass tray extension.
When loading paper larger than 8-1/2" x 11"R or A4R, be sure
to pull out the bypass tray extension.
8
Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this switch in
the "on" position.
When using the fax or Internet fax functions, keep this switch in
the "on" position.
9
Waste toner box
This collects excess toner that remains after printing.
Your service technician will collect the waste
toner box.
toner box.
10
Waste toner box compartment cover
Open this to remove a paper misfeed from trays 1 to 4, or to
replace the waste toner box.
replace the waste toner box.
11
Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to open
the right side cover.
the right side cover.
1
8
9
10
11
2
3
4
5
6
7
When a finisher /
saddle stitch finisher
is not installed
saddle stitch finisher
is not installed
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man17) service manuals if exist.