Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man72) Service Manual online
MX-7000N MX-5500N/6200N/7000N 1 – 17
12) Close the waste toner bottle section cover.
13) Close the tandem cassette.
c. Tray 3, tray4
1)
1)
Pull out gently the tray 3/4 until it stops.
If paper remains in the tray, remove it.
If paper remains in the tray, remove it.
2)
Adjust the guide plates A and B by squeezing their lock levers
and sliding them to match the vertical and horizontal dimen-
sions of the paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
and sliding them to match the vertical and horizontal dimen-
sions of the paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
L. Specifications setup
Used to set the specifications with SIM26 according to the cus-
tomer's request.
tomer's request.
To customize the following items after completion of the destination
setup, change the set values.
setup, change the set values.
M. Image quality check
Be sure to check the following items related to image quality. For
details of the adjustment and checking procedures, refer to the “[6]
ADJUSTMENT” on the Service Manual.
Check that the following items are normal. If not, carry out the
adjustment.
details of the adjustment and checking procedures, refer to the “[6]
ADJUSTMENT” on the Service Manual.
Check that the following items are normal. If not, carry out the
adjustment.
NOTE: When installing the copier, be sure to carry out the copy
color balance and the printer color balance.
1)
Image skew (see ADJ 8)
2)
Image resist (see ADJ 12)
3)
Image loss, void area (see ADJ 20)
4)
Copy color balance (Auto adjustment)
5)
Printer color balance (Auto adjustment)
(1) Copy color balance adjustment (Auto adjustment)
a. Note before execution of the copy color balance adjust-
ment (Auto adjustment)
• Be sure to use the specified paper for color.
b. Adjustment procedure
1)
1)
Enter the SIM 46-24 mode.
2)
Press [EXECUTE] key. (A3 or 11" x 17" paper is automatically
selected.)
The color patch image (adjustment pattern) is printed out.
selected.)
The color patch image (adjustment pattern) is printed out.
A
B
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
2
Paper size setting of the Tray1/LCC.
3
Used to set the auditor specification mode.
5
Used to set the number (1 or 2) of count of paper
(A3 or WLT or 8K) that passes.
1:1pc 2:2pcs
* Targets: Total counter, maintenance counter,
(A3 or WLT or 8K) that passes.
1:1pc 2:2pcs
* Targets: Total counter, maintenance counter,
developer counter.
18
Used to set YES/NO of the toner save mode (Only
in UK and Japan versions)
* Carry out the setting by the user's program
in UK and Japan versions)
* Carry out the setting by the user's program
except the UK version.
1:accept 2:inhibit
52
Used to set whether non-printed paper (insertion
paper, cover paper) is counted up or not.
1:YES 2:NO
paper, cover paper) is counted up or not.
1:YES 2:NO
53
Used to set YES/NO of auto color calibration
permission.
1:accept 2:inhibit
permission.
1:accept 2:inhibit
65
Used to set the limit number of sheets for stapling.
1:limited 2:unlimited
1:limited 2:unlimited
SIMULATION NO.46-24
TEST
ENGINE HALFTONE AUTO ADJUSTMENT
EXECUTE
CLOSE
PRESS [EXECUTE] TO PROCON EXECUTIONAND PRINT THE TEST PATCH.
(PLEASE USE SPECIFIED TYPE OF A3 OR 11"
17" SIZE PAPER
FOR THIS ADJUSTMENT)
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man72) service manuals if exist.