Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man72) Service Manual online
MX-7000N MX-5500N/6200N/7000N 1 – 11
2)
Install the IL interface harness (Package part No. 4).
3)
Install the switch cover and fix it with a screw.
(3) Installation of the paper exit tray
1)
Remove the resin E ring, and remove the toner cover.
* Even if the toner cover remains being installed, the following
* Even if the toner cover remains being installed, the following
procedure is possible. However, remove it for the working
property.
property.
2)
Install the paper exit tray (Package part No. 1) to the main unit,
and fix with the screws (Package part No. 5).
and fix with the screws (Package part No. 5).
3)
Install the toner cover and fix it with a resin E ring.
(4) Installation of the paper holding arm and paper
exit full detection actuator
1)
Install the paper holding arm (Package part No. 2), and install
the paper exit full detection actuator (Package part No. 3).
* Check the size of the diameter of place where paper holding
the paper exit full detection actuator (Package part No. 3).
* Check the size of the diameter of place where paper holding
arm is installed.
6
4
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man72) service manuals if exist.