Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man71) Service Manual online
MX-7000N SENSOR, SWITCH SECTION T – 2
5)
Remove the screws (F), and remove the holder (G).
6)
Remove the screw (H), and remove the right door open/close
switch (I).
switch (I).
(2) Main switch
1)
Romove the front cabinet left. (Refer to the "A. EXTERNAL
OUTFIT".)
OUTFIT".)
2)
Pull out the paper feed tray (A).
3)
Remove the screw (B), and remove the cover (C). Remove the
screw (D), and remove the left cabinet lower (E). Remove the
screw (F), and remove the rail cover (G).
* When installing, engage the pawl (H) to hole of the frame.
* Install so that the rib (I) of the left cabinet lower is positioned
screw (D), and remove the left cabinet lower (E). Remove the
screw (F), and remove the rail cover (G).
* When installing, engage the pawl (H) to hole of the frame.
* Install so that the rib (I) of the left cabinet lower is positioned
inside than adjuster cover (J).
4)
Remove the screws (K), and remove the frame cover (L).
5)
Remove the screw (M), and remove the cover (N). Remove
the screws (O), and remove the main switch unit (P).
* When installing, engage the pawl (Q) to the main unit (P).
* When installing, pinch the pawl (R) to the frame (S).
the screws (O), and remove the main switch unit (P).
* When installing, engage the pawl (Q) to the main unit (P).
* When installing, pinch the pawl (R) to the frame (S).
Parts
b
Main switch
F
F
G
I
H
a
b
A
H
H
B
C
D
E
E
EF
J
I
H
G
K
K
L
N
O
M
R
S
P
Q
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man71) service manuals if exist.