Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man63) Service Manual online
MX-7000N DEVELOPING SECTION L – 5
* After supplying developer, do not tilt the development unit.
b. DV seal (CL), DV side seal F (CL), DV side seal R (CL)
1)
Remove the development unit (CL). (Refer to the "(1) Devel-
opment unit (CL)".)
opment unit (CL)".)
2)
Remove the DV seal (CL) (A), the DV side seal F (CL) (B), and
the DV side seal R (CL) (C).
the DV side seal R (CL) (C).
* Attach the DV seal (CL) (D) and DV side seal F (CL) (E) and
DV side seal R (CL) (F) along the reference line.
c. Toner density sensor C/ M/ Y (ATC)
1)
Remove the development unit (CL). (Refer to the "(1) Devel-
opment unit (CL)".)
opment unit (CL)".)
2)
Remove the screws (A), and remove the guide (B). Remove
the screws (C), and disconnect the connector (D), and remove
the toner density sensor C/M/Y (ATC) (E) and mylar (F).
* When pasting the mylar, paste it along the reference line.
the screws (C), and disconnect the connector (D), and remove
the toner density sensor C/M/Y (ATC) (E) and mylar (F).
* When pasting the mylar, paste it along the reference line.
d. Toner filter (CL)
Unit
Parts
Mainte
nance
1
Development unit
(CL)
(CL)
b
DV seal (CL)
▲
c
DV side seal F (CL)
▲
d
DV side seal R (CL)
▲
1-c
1-b
1-d
B
A
C
1-b
1-c
1-d
0 - 0.2mm
0 - 0.3mm
0 - 0.3mm
0 - 0.3mm
0 - 0.3mm
0 - 0.5mm
E
F
D
Unit
Parts
1
Development unit
(CL)
(CL)
e
Toner density sensor C/M/Y (ATC)
Unit
Parts
Mainte
nance
1
Development unit
(CL)
(CL)
f
Toner filter (CL)
▲
1-e
B
1-e
A
A
C
D
E
F
0 - 0.5mm
referance
reference
0 - 0.3mm
1-f
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man63) service manuals if exist.