Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man47) Service Manual online
MX-7000N SELF DIAG AND TROUBLE CODE 8 – 23
F3-12
Tray 1 lift-up trouble
F3-22
Tray 2 lift-up trouble
F3-32
Tray 3 lift-up trouble
F3-42
Tray 4 lift-up trouble
F9-00
Communication trouble between the
controller and the printer controller
(FIERY option)
controller and the printer controller
(FIERY option)
H2-00
Detection thermistor open (TH1_AD2)
of the non-contact thermistor
of the non-contact thermistor
H2-01
Lower thermistor open (TH_LM)
H2-02
Sub thermistor open (TH_US)
H2-03
Non-contact thermistor
compensation thermistor open
(TH1_AD1)
compensation thermistor open
(TH1_AD1)
Trouble content
T1LUD does not turn ON within the specified time.
Section
PCU
Case 1
Cause
T1LUD sensor trouble. Harness connection trouble
between PCU PWB, the lift-up unit, and the paper
feed unit.
between PCU PWB, the lift-up unit, and the paper
feed unit.
Check and
remedy
remedy
Check the harness and the connector of T1LUD.
Case 2
Cause
Tray 1 lift-up motor trouble
Check and
remedy
remedy
Check the lift-up unit.
Trouble content
T2LUD does not turn ON within the specified time.
Section
PCU
Case 1
Cause
T2LUD sensor trouble. Harness connection trouble
between PCU PWB, the lift-up unit, and the paper
feed unit.
between PCU PWB, the lift-up unit, and the paper
feed unit.
Check and
remedy
remedy
Check the harness and the connector of T2LUD.
Case 2
Cause
Tray 2 lift-up motor trouble
Check and
remedy
remedy
Check the lift-up unit.
Trouble content
LUD3 does not turn ON within the specified time.
Section
PCU
Case 1
Cause
LUD3 sensor trouble. Harness connection trouble
between PCU PWB, the lift-up unit, and the paper
feed unit.
between PCU PWB, the lift-up unit, and the paper
feed unit.
Check and
remedy
remedy
Check the harness and the connector of LUD3.
Case 2
Cause
Tray 3 lift-up motor trouble
Check and
remedy
remedy
Check the lift-up unit.
Trouble content
LUD4 does not turn ON within the specified time.
Section
PCU
Case 1
Cause
LUD4 sensor trouble. Harness connection trouble
between PCU PWB, the lift-up unit, and the paper
feed unit.
between PCU PWB, the lift-up unit, and the paper
feed unit.
Check and
remedy
remedy
Check the harness and the connector of LUD4.
Case 2
Cause
Tray 4 lift-up motor trouble
Check and
remedy
remedy
Check the lift-up unit.
Trouble content
A communication error is detected during initial
establishment or after establishment of
communication with the controller (FIERY option).
establishment or after establishment of
communication with the controller (FIERY option).
Section
MFP
Case 1
Cause
Printer controller MFPcnt PWB cable trouble
Check and
remedy
remedy
Check the printer controller MFPcnt PWB cable.
Case 2
Cause
MFPcnt PWB trouble, printer controller PWB
trouble
trouble
Check and
remedy
remedy
Replace the MFPcnt PWB. Repair or replace the
printer controller PWB.
After completion of check, turn OFF/ON the
machine and the printer controller.
printer controller PWB.
After completion of check, turn OFF/ON the
machine and the printer controller.
Trouble content
Thermistor open
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection trouble, AC power
source trouble, fusing unit not-installed
section connector connection trouble, AC power
source trouble, fusing unit not-installed
Check and
remedy
remedy
Check the harness and the connector from the
thermistor to the control PWB.
thermistor to the control PWB.
Trouble content
Thermistor open
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection trouble, AC power
source trouble, fusing unit not-installed
section connector connection trouble, AC power
source trouble, fusing unit not-installed
Check and
remedy
remedy
Check the harness and the connector from the
thermistor to the control PWB.
thermistor to the control PWB.
Trouble content
Thermistor open
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection trouble, AC power
source trouble, fusing unit not-installed
section connector connection trouble, AC power
source trouble, fusing unit not-installed
Check and
remedy
remedy
Check the harness and the connector from the
thermistor to the control PWB.
thermistor to the control PWB.
Trouble content
Thermistor open
Section
PCU
Case 1
Cause
Thermistor trouble, control PWB trouble, fusing
section connector connection trouble, AC power
source trouble
section connector connection trouble, AC power
source trouble
Check and
remedy
remedy
Check the harness and the connector from the
thermistor to the control PWB.
thermistor to the control PWB.
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man47) service manuals if exist.