Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man24) Peripheral online
MX-CFX1 OPERATIONAL DESCRIPTION 5 – 2
B. Normal paper feed operation of inserter
(online/offline)
[Paper loading]
1) A sheet is placed in the paper feed tray of the inserter.
2) The START LED lights up in blue on the operator panel of the
2) The START LED lights up in blue on the operator panel of the
inserter.
3) An operation command is sent by the main unit, or a user
presses the START switch on the operator panel of the
inserter.
inserter.
4) The registration clutch is turned ON to lock the registration roll-
ers.
[Separation]
5) The paper feed motor reverses to lower the pickup roller,
thereby taking in the sheet from the paper feed tray.
6) The registration sensor detects the leading edge of the sheet.
7) The sheet makes contact with the registration rollers to form a
7) The sheet makes contact with the registration rollers to form a
loop, thereby stopping the paper feed motor.
8) The registration clutch is turned OFF.
9)
The paper feed motor starts to rotate in the forward direction.
The registration rollers and vertical transport rollers rotate.
The registration rollers and vertical transport rollers rotate.
10) The timing sensor detects the leading edge of the sheet.
11) The leading edge of the sheet passes between the vertical
11) The leading edge of the sheet passes between the vertical
transport rollers.
12) When sheet transport needs to be suspended for adjusting the
space between sheets, the paper feed motor stops to stop the
sheet.
sheet.
[Transport]
13) When a predetermined waiting time period has passed, The
13) When a predetermined waiting time period has passed, The
paper feed motor restarts.
(If the transport motor has stopped, it is started.)
(If the transport motor has stopped, it is started.)
14) The paper exit sensor is turned ON, and detects the leading
edge of the sheet.
15) The timing sensor is turned OFF, and the trailing edge of the
sheet is detected.
16) When the trailing edge of the sheet leaves the vertical trans-
port rollers, the paper feed motor stops.
(When there is a next sheet to be inserted, the paper feed
motor reverses to take it in.
(When there is a next sheet to be inserted, the paper feed
motor reverses to take it in.
[Paper exit]
17) The paper exit sensor is turned OFF, and the trailing edge of
the sheet is detected.
18) When there is no next sheet to be inserted, the transport motor
stops.
NOTE: While the transport motor (horizontal transport rollers 1 and
horizontal transport rollers 2) rotates at a speed specified
by the main unit in the online mode, it rotates at either of
the speeds shown below in the offline mode.
by the main unit in the online mode, it rotates at either of
the speeds shown below in the offline mode.
* Transport speed in offline mode
Small-sized sheet (of which length detected in the tray is 216 mm
or less): 627 mm/sec
Large-sized sheet (of which length detected in the tray is more
than 276 mm): 800 mm/sec
or less): 627 mm/sec
Large-sized sheet (of which length detected in the tray is more
than 276 mm): 800 mm/sec
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man24) service manuals if exist.