Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 9
b. Removal of saddle inlet front inside cover
1) Remove the three screws [1], and remove the saddle inlet front
1) Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
c. Removal of front inside upper cover
1) Remove the four screws [1], and remove the front inside upper
1) Remove the four screws [1], and remove the front inside upper
cover [2].
* For MX-FNX3, refer to 1-A-(3)-d.
d. Removal of front inside lower cover
1) Remove the screw [1], and remove the roller knob [2].
2) Remove the four screws [3], and remove the front inside lower
1) Remove the screw [1], and remove the roller knob [2].
2) Remove the four screws [3], and remove the front inside lower
cover [4].
(9) PCB cover
a. PCB cover
1)
1)
Remove the seven screws [1], and remove the PCB cover [2].
B. Drive system
(1) Stapler
a. Removal of front cover
1)
1)
Open the front cover [1], and remove the clip [2].
2)
Lift the front cover [1] to remove it.
* For MX-FNX3, refer to 1-A-(1)-a.
b. Removal of saddle inlet front inside cover
1)
1)
Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
inside cover [2].
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[3]
[1]
[4]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man18) service manuals if exist.