Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 31
f. Removal of upper door
1) Open the upper door [1], and release the hook [2] at two posi-
1) Open the upper door [1], and release the hook [2] at two posi-
tions.
2) Remove the screw [3], and remove the upper door [1].
g. Removal of buffer roller
1) Remove the buffer roller shaft [2] from the arm [1] at two posi-
1) Remove the buffer roller shaft [2] from the arm [1] at two posi-
tions.
2) Remove the clips [3] at two positions, and remove the two
buffer rollers [4].
(5) Return roller
a. Removal of front cover
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it.
* For MX-FNX3, refer to 1-A-(1)-a.
1) Open the front cover [1], and remove the clip [2].
2) Lift the front cover [1], and remove it.
* For MX-FNX3, refer to 1-A-(1)-a.
b. Removal of rear cover
1)
1)
Shift the tray cable cover [1] to the tray side, and remove it.
2)
Remove the six screws [2], and lift and remove the rear cover
[3].
[3].
* For MX-FNX3, refer to 1-A-(2)-a.
c. Removal of saddle inlet front inside cover
1)
1)
Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
inside cover [2].
d. Removal of front inside upper cover
1)
1)
Remove the four screws [1], and remove the front inside upper
cover [2].
cover [2].
* For MX-FNX3, refer to 1-A-(3)-d.
[3]
[1]
[2]
[3]
[3]
[1]
[1]
[2]
[4]
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man18) service manuals if exist.