Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 20
b. Removal of rear cover
1) Shift the tray cable cover [1] to the tray side, and remove it.
2) Remove the six screws [2], and lift and remove the rear cover
1) Shift the tray cable cover [1] to the tray side, and remove it.
2) Remove the six screws [2], and lift and remove the rear cover
[3].
c. Removal of saddle inlet front inside cover
1) Remove the three screws [1], and remove the saddle inlet front
1) Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
d. Removal of front inside upper cover
1) Remove the four screws [1], and remove the front inside upper
1) Remove the four screws [1], and remove the front inside upper
cover [2].
e. Removal of front inside lower cover
1)
1)
Remove the screw [1], and remove the roller knob [2].
2)
Remove the four screws [3], and remove the front inside lower
cover [4].
cover [4].
f. PCB cover
1)
1)
Remove the seven screws [1], and remove the PCB cover [2].
g. Removal of saddle stitcher controller PCB
1)
1)
Remove the four screws [1] and sixteen connectors [2], and
remove the saddle stitcher controller PCB [3].
remove the saddle stitcher controller PCB [3].
[2]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[3]
[1]
[4]
[1]
[1]
[2]
[1]
[1]
[1]
[1]
[2]
[3]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man18) service manuals if exist.