Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man18) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 18
2) Remove the four screws [3].
3) Open the upper cover [4], and remove the inlet port feed unit
3) Open the upper cover [4], and remove the inlet port feed unit
[5].
l. Removal of saddle unit
1) Disconnect the two connectors [1], and remove the harness
1) Disconnect the two connectors [1], and remove the harness
from the clamp [2] at three positions.
2) Remove the harness from the clamps [2] at two positions on
the bottom of the delivery side.
3)
Remove the two screws [4].
4)
Remove the three screws [5].
5)
Remove the saddle unit [6] from the paper feed side.
CAUTION: When installing saddle unit, arrange so that the Mylar
[1] on the top of the saddle section is on the outside of
the feed guide plate [2]. If it is installed on the inside,
feed operation may be faulty.
the feed guide plate [2]. If it is installed on the inside,
feed operation may be faulty.
[3]
[3]
[5]
[4]
[1]
[3]
[2]
[3]
[2]
[4]
[6]
[5]
[5]
[1]
[2]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man18) service manuals if exist.