Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man17) Peripheral online
MX-FNX4 OPERATIONAL DESCRIPTION 5 – 4
C. Delivery path of finisher
Outline
Three types of delivery paths to the tray 1/2 of this machine are
available, depending on the processes of the paper delivery.
Straight delivery
If sort job is not to be implemented, all the paper is delivered
through the path shown in the figure below.
Three types of delivery paths to the tray 1/2 of this machine are
available, depending on the processes of the paper delivery.
Straight delivery
If sort job is not to be implemented, all the paper is delivered
through the path shown in the figure below.
Path to stapling tray
If the sort job of paper in other than A4, B5, or LTR size or the sta-
ple sort is to be implemented, delivered paper passes through this
path. After paper is fed to the stapling tray, it is aligned and stapled.
Then, it is delivered with the help of the trailing edge assist.
If the sort job of paper in other than A4, B5, or LTR size or the sta-
ple sort is to be implemented, delivered paper passes through this
path. After paper is fed to the stapling tray, it is aligned and stapled.
Then, it is delivered with the help of the trailing edge assist.
Path to buffer/stapling tray
If the sort job of paper in A4, B5, or LTR size or the staple sort is to
be implemented, delivered paper passes through this path. After
two sheets (if stitching is to be performed at two points, two or three
sheets) are delivered to the buffer, they are aligned at the stapling
tray, stapled, and then discharged. Since paper is delivered from
the host machine continuously, paper fed to the buffer can be
simultaneously delivered together with stack paper that has been
already stapled at the stapling tray even while stapling or offset
operation is being carried out. Stack paper delivered from the buffer
is fed to the stapling tray, and paper stapled at the stapling tray is
fed to the tray.
If the sort job mode is selected, the simultaneous delivery of two
sheets of A4 size paper in paper stacks is described as shown
below.
If the sort job of paper in A4, B5, or LTR size or the staple sort is to
be implemented, delivered paper passes through this path. After
two sheets (if stitching is to be performed at two points, two or three
sheets) are delivered to the buffer, they are aligned at the stapling
tray, stapled, and then discharged. Since paper is delivered from
the host machine continuously, paper fed to the buffer can be
simultaneously delivered together with stack paper that has been
already stapled at the stapling tray even while stapling or offset
operation is being carried out. Stack paper delivered from the buffer
is fed to the stapling tray, and paper stapled at the stapling tray is
fed to the tray.
If the sort job mode is selected, the simultaneous delivery of two
sheets of A4 size paper in paper stacks is described as shown
below.
Finisher controller PCB
No.2
tray
paper
paper
detection
signal
TR
Y2-P
Y2-P
No.1
tray
paper
paper
detection
signal
TR
Y1-P
Y1-P
Feed
path
paper
detection
signal
TIMING
Inlet
paper
paper
detection
signal
INLET
Tray
Paper
Stack delivery
roller
No.1 delivery
roller
Buffer roller
Inlet roller
Paper
Stack delivery
roller
No.1 delivery
roller
Buffer
roller
Inlet roller
Paper
Stapling tray
Trailing edge assist
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man17) service manuals if exist.