Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) Service Manual online
MX-6070N MX-5070N/6070N/5050N/6050N (MAIN UNIT) 1 – 6
C. Paper feed tray setup
(1)
System setting
1)
Press the [SETTINGS] key.
2)
Touch the [Init. Install Settings] key.
3)
Touch the [Password] key at the Administrator Login.
Enter the password with 10-key. "admin"
4)
Touch the [Paper Tray Settings] key to configure the settings.
These settings specify the paper type, paper size, and functions
allowed for each paper tray. When the [Tray Settings] key is
touched, a list appears showing the trays and the current settings.
These settings specify the paper type, paper size, and functions
allowed for each paper tray. When the [Tray Settings] key is
touched, a list appears showing the trays and the current settings.
5)
Touch the [Each tray] key in the above screen to change the set-
tings. The following settings can be configured.
tings. The following settings can be configured.
(2)
Tray size setup
1)
Pull out the paper tray.
Gently pull the tray out until it stops.
If paper remains in the tray, remove it.
2)
Adjust the guide plates A and B by squeezing their lock levers and
sliding them to match the vertical and horizontal dimensions of the
paper to be loaded.
sliding them to match the vertical and horizontal dimensions of the
paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
while squeezing its lock lever.
3)
Adjust the guide plates A and B by squeezing their lock levers and
D. Specifications setup
Use simulation 26-6 to set the machines destination.
After completion of destination settings, change the set values to cus-
tomize the following settings.
tomize the following settings.
Item
Description
Type
Select the type of paper that is loaded in the tray. The paper
types that can be selected vary by paper tray.
types that can be selected vary by paper tray.
Size
Select the paper size from the list. The paper sizes that can be
selected vary by tray. The sizes that can be selected may also
be restricted by the paper type selected above.
If the desired size does not appear in the list, select [Custom
Size] and directly enter the size (only for the bypass tray).
selected vary by tray. The sizes that can be selected may also
be restricted by the paper type selected above.
If the desired size does not appear in the list, select [Custom
Size] and directly enter the size (only for the bypass tray).
Feeding
Approved
Job
Approved
Job
Select the modes that can be used. If there is a function that you
do not wish to be used with the selected tray, disable the
function. When the "Type" is other than plain paper, recycled
paper, colored paper, or a user type, [Fax] and [Internet Fax]
cannot be selected.
do not wish to be used with the selected tray, disable the
function. When the "Type" is other than plain paper, recycled
paper, colored paper, or a user type, [Fax] and [Internet Fax]
cannot be selected.
A
B
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
3
Used to set the auditor specification mode.
5
Used to set the count mode of the total counter and
the maintenance counter.
the maintenance counter.
18
Used to set YES/NO of the toner save mode (Only in
UK and Japan versions)
* For other destination versions, this setup is made
UK and Japan versions)
* For other destination versions, this setup is made
by the user program.
52
Used to set YES/NO of counting when non-print
paper is passed through each counter.
paper is passed through each counter.
65
Used to set the limit number of sheets for stapling.
Ĭ
ĭ
Į
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man7) service manuals if exist.