Read Sharp MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man5) Service Manual online
MX-6070V SIMULATION 6 – 8
66
6
Used to print the confidential registration
check table (BOX No, BOX name,
passcode
check table (BOX No, BOX name,
passcode
7
Used to output all image data saved in the
image memory
image memory
8
Used to send the selected sound message
to the line and the speaker (send level:
max)
to the line and the speaker (send level:
max)
9
Used to send the selected sound message
to the line and the speaker (send level: soft
SW setting)
to the line and the speaker (send level: soft
SW setting)
10
Used to clear the FAX and image send
image data
image data
11
Used to send the selected signal at 300bps
to the line and the speaker (send level:
max)
to the line and the speaker (send level:
max)
12
Used to send the selected signal at 300bps
to the line and the speaker (send level: soft
SW setting)
to the line and the speaker (send level: soft
SW setting)
13
Used to register dial number for Sim66-14/
15/16 dial test
15/16 dial test
14
Used to execute the dial pulse (10pps) send
test and to adjust the make time
test and to adjust the make time
15
Used to execute the dial pulse (20pps) send
test and to adjust the make time
test and to adjust the make time
16
Used to execute the DTMF signal send test
and to adjust the send level
and to adjust the send level
17
Used to send the DTMF signal to the line
and the speaker (send level: max)
and the speaker (send level: max)
18
Used to send the DTMF signal to the line
and the speaker (send level: soft SW
setting)
and the speaker (send level: soft SW
setting)
21
Used to print the selected items (system
error, protocol monitor)
error, protocol monitor)
22
Used to set the handset sound volume
(Japan model only)
(Japan model only)
29
Used to initialize the telephone book data
and FAX system error
and FAX system error
30
Used to display the TEL/LIU status change,
the display is highlighted by status change
the display is highlighted by status change
31
Used to set ON/OFF the port for output to
TEL/LIU
TEL/LIU
32
Used to check the fixed data received from
the line and to display the result
the line and to display the result
33
Used to execute detection of various
signals with the line connected and to
display the detection result. When a signal
is detected the display is highlighted
signals with the line connected and to
display the detection result. When a signal
is detected the display is highlighted
36
Used to check send and receive data from
the MODEM controller to the MFP controller
or the data line or the command line
individually
the MODEM controller to the MFP controller
or the data line or the command line
individually
39
Used to check and change the destination
setting saved in EEPROM of the FAX BOX
setting saved in EEPROM of the FAX BOX
42
Used to rewrite the program to power
control installed in the FAX BOX
control installed in the FAX BOX
43
Used to write the adjustment value into the
power control installed in the FAX BOX
power control installed in the FAX BOX
61
Used to display the image send-related soft
SW (151-250) on the LCD to allow
changing the soft SW while checking with
the LCD
SW (151-250) on the LCD to allow
changing the soft SW while checking with
the LCD
62
Used to import the FAX receive data into a
USB memory in PDF file type
USB memory in PDF file type
67
17
Printer reset
24
Printer color balance adjustment (Auto
adjustment)
adjustment)
6
25
Printer color balance adjustment (Manual
adjustment)
adjustment)
1-4
6
Sim No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
67
26
Used to set the target color balance of the
printer mode auto color balance adjustment
printer mode auto color balance adjustment
6
27
Used to set the service target of the printer
mode auto color balance adjustment
mode auto color balance adjustment
6
28
Used to set the default of the service target
of the printer mode auto color adjustment
of the printer mode auto color adjustment
6
31
Used to clear the printer calibration value
33
Used to change the gamma of the printer
screen
screen
34
Used to set the density correction in the
printer high density section
printer high density section
36
Used to adjust the density in the low density
section
section
41
Used to set 2 color print
42
Used to set 2 color print color density
43
Used to adjust 2 color mode color balance
52
Used to set the default of the gamma of the
printer screen
printer screen
1-3
54
Printer color balance adjustment
1-3
Sim No.
Easy Mode
In
st
a
lla
ti
o
n
Main
te
nance
Adjus
tm
e
nt and
Set
ti
ngs
Click on the first or last page to see other MX-5050N / MX-5050V / MX-5070N / MX-5070V / MX-6050N / MX-6050V / MX-6070N / MX-6070V (serv.man5) service manuals if exist.