Read Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man123) Technical Bulletin online
CCE- 1019R
11 UI
If the non-standard size was programmed as the original size with the Repeat
Layout function, the "Setting is not completed" message would be displayed when
calling up the program. This problem has been corrected.
Layout function, the "Setting is not completed" message would be displayed when
calling up the program. This problem has been corrected.
No. Item
Details
12 UI
When creating a new button with a long name like 3 lines long as the scan
destination, the operation panel would be hang up when pressing the concerned
button. This problem has been corrected.
destination, the operation panel would be hang up when pressing the concerned
button. This problem has been corrected.
13 UI
When selecting the program list of the Image Send, in some cases, it took a long
time to switch the screen. This process has been improved.
time to switch the screen. This process has been improved.
14 Printer
When printing, the gradation area of the image might become the dot-like. This
problem has been corrected.
problem has been corrected.
15 Printer
When printing with PS driver, the drawing position when the print mode was set to
"Normal" and "High quality" was different from the position when it was set to
"Fine". This problem has been corrected.
"Normal" and "High quality" was different from the position when it was set to
"Fine". This problem has been corrected.
16 Printer
When performing the Direct Print for the certain PDF file, in some cases, the
characters were missing.
This problem has been corrected.
characters were missing.
This problem has been corrected.
17 Printer
When performing the Direct Print for the certain JPEG file, in some cases, 2 pages
were printed for 1file. This problem has been corrected.
were printed for 1file. This problem has been corrected.
18 Printer
When printing with the combination of the Pamphlet function and feeding from the
bypass tray, if the paper was emptied in the bypass tray, in some cases, the
machine would not resume printing even though the paper was added. This issue
has been corrected.
bypass tray, if the paper was emptied in the bypass tray, in some cases, the
machine would not resume printing even though the paper was added. This issue
has been corrected.
19 Printer
The feature to set the printable area to the same level as the previous models has
been added to the controller SOFT SW.
SIM55-3 SW No. 27 Data 7
0: MX-2310 series/2610 series/3610 series/4110 series/5110 series Spec (Default)
1: MX-2600 series/3100 series/4100 series/5001 series Spec
been added to the controller SOFT SW.
SIM55-3 SW No. 27 Data 7
0: MX-2310 series/2610 series/3610 series/4110 series/5110 series Spec (Default)
1: MX-2600 series/3100 series/4100 series/5001 series Spec
20 Printer
If printing from the certain CAD software when using the external accounting
software, in some cases, MFP would hang up. This issue has been corrected.
software, in some cases, MFP would hang up. This issue has been corrected.
21 Printer
When printing the job containing the MACRO data from SAP, in same cases,
unnecessary characters would be printed at the head of each page. This problem
has been corrected.
unnecessary characters would be printed at the head of each page. This problem
has been corrected.
22 Network
Modification has been made not to finalize the IP address until the IP information
is obtained from DHCP server when the setting of DHCP is enabled.
is obtained from DHCP server when the setting of DHCP is enabled.
23 Network
When accessing to the file server with the sever name, in some cases, Scan to
Network Folder would be unusable. This problem has been corrected.
Network Folder would be unusable. This problem has been corrected.
24 Network
When the application communication kit (MX-AMX2) was equipped, if the
communication with the external server was disconnected under the condition
that the [Forward to Application] setting in [Receiving Application Setting] was set
to "Enable", the Fax job would be deleted without being output. This problem has
been corrected.
communication with the external server was disconnected under the condition
that the [Forward to Application] setting in [Receiving Application Setting] was set
to "Enable", the Fax job would be deleted without being output. This problem has
been corrected.
25 FAX
When receiving the FAX, in some cases, the receiving error: NG17-0000 occurred.
This problem has been corrected.
This problem has been corrected.
26 FAX
When 3 Lines expansion kit was connected, if the Line1 was disabled and the Auto
Line was selected, the data was sent with the Line1 even though it was disabled.
This problem has been corrected.
Line was selected, the data was sent with the Line1 even though it was disabled.
This problem has been corrected.
27
Main unit
Control
Control
The modification has been made not to largely change from the previous value by
setting up the limitation on the range which can change from the previous value
when executing the auto registration adjustment.
In conjunction with this measure, the modification has been made to start the
adjustment from the center value when executing the forced registration
adjustment.
setting up the limitation on the range which can change from the previous value
when executing the auto registration adjustment.
In conjunction with this measure, the modification has been made to start the
adjustment from the center value when executing the forced registration
adjustment.
28
Main unit
Authentication
Authentication
With the setting of IC card or the manual log-in by the manual input, using the
LDAP Authentication, if you attempted the manual log-in by the manual input after
LDAP Authentication, if you attempted the manual log-in by the manual input after
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man123) service manuals if exist.